Reddit reviews J-B Weld 50112 ClearWeld 5 Minute Set Epoxy Syringe - Clear - 25 ml
We found 12 Reddit comments about J-B Weld 50112 ClearWeld 5 Minute Set Epoxy Syringe - Clear - 25 ml. Here are the top ones, ranked by their Reddit score.
J-B Weld ClearWeld: A clear, quick setting and multipurpose two part epoxy that provides a strong and lasting bond on surfaces including metal, tile, most plastics, ceramic, glass, wood and more. J-B Weld ClearWeld comes in a syringe allowing for an easy 1:1 mix ratio. The unique syringe has a re-sealable cap that prevents drying out and leaking, allowing for multiple uses!Cure and Set Time: After mixing the two part formula with the included mixing tray and stir stick, ClearWeld takes 5 minutes to set and 1 hour to cure. J-B Weld ClearWeld set and cure color is clear.Strength: J-B Weld ClearWeld has tensile strength of 3900 PSI.Surface Applications: Metal, Plastic & PVC, Wood, Concrete, Ceramic & Tile, Fiberglass and Glass.Fit type: Universal FitFlash point: 67.00 degrees_celsiusDo it Yourself: Big or small, you can DIY it with J-B Weld. Our heavy duty epoxy and adhesives repair & restore it right the first time. J-B Weld delivers superior performance, quality, and results for the World’s Strongest Bond.
The pegs are plastic on those right? If gluing them doesn't work (since the peg will lack lateral stability at the break) you could drill out the broken pegs and use epoxy to put in replacement loom pegs. They might be a different color and shape, but at least you could still use the loom and since the base of the peg would be set in epoxy and surrounded by the loom body, it would have much greater strength against shearing forces.
Alternatively, you could use drywall or self tapping metal screws to just screw into the spot where the broken pegs are. Pre-drill the hole with a bit that is just a tiny bit smaller than the screw to prevent splitting the loom plastic.
I found the same on my Mini Hilal. I'm going to try using JB Weld.
J-B Weld 50112 ClearWeld Quick-Setting Epoxy Syringe - Dries Clear - 25 ml https://www.amazon.com/dp/B009EU5ZM0/ref=cm_sw_r_cp_awd_PppRwbFNCJ3H8
JB Weld works great, once it dries it is very strong. It has little to no odor.
https://www.amazon.com/J-B-Weld-8265S-Original-Reinforced/dp/B01FWGF9L6/ref=sr_1_11?hvadid=241629233883&hvdev=t&hvlocphy=9024550&hvnetw=g&hvpos=1t1&hvqmt=e&hvrand=4321946538073873986&hvtargid=kwd-581086181&keywords=jb+weld&qid=1550378163&s=gateway&sr=8-11&tag=googhydr-20
The only drawback is it is grey when mixed and it is hard to make it not ooze when you push the parts together. So it can be messy.
They have a clear version but haven’t tried it myself, been meaning to order some and try it:
https://www.amazon.com/J-B-Weld-50112-Clear-0-85/dp/B009EU5ZM0/ref=sr_1_10?hvadid=241629233883&hvdev=t&hvlocphy=9024550&hvnetw=g&hvpos=1t1&hvqmt=e&hvrand=4321946538073873986&hvtargid=kwd-581086181&keywords=jb+weld&qid=1550378453&s=gateway&sr=8-10&tag=googhydr-20
Been using this JB weld epoxy without an issue, but I dont want or need instant seal but a strong seal: https://www.amazon.com/gp/product/B009EU5ZM0/
use epoxy, they sell it on amazon for a good $8.
http://www.amazon.com/gp/product/B009EU5ZM0/ref=oh_aui_detailpage_o08_s00?ie=UTF8&psc=1
That is the link to the one I used in my down stem repair on my bong.
http://www.reddit.com/r/StonerEngineering/comments/2f2lpz/repaired_my_broken_downstem_on_bong/
https://www.amazon.com/J-B-Weld-50112-ClearWeld-Quick-Setting/dp/B009EU5ZM0
Maybe look into JB weld, or some kind of epoxy?
Drill some holes on each side of the broken part and file the plastic down to be thinner. Get some 4000psi+ epoxy like this ( www.amazon.com/dp/B009EU5ZM0 ) and shape it to how it should look. Make sure to get it through all the holes you drilled so that it has places to hold onto for strength. Wrap it in wax paper and clamp it to hold the broken part together.
Once it dries just file it down to size.
This:
http://www.amazon.co.uk/J-B-Clear-Quick-Setting-Epoxy/dp/B009EU5ZM0/
JB Weld is my go to for epoxy or adhesives: https://www.amazon.com/J-B-Weld-50112-ClearWeld-Quick-Setting/dp/B009EU5ZM0
I've used epoxy from the same syringe probably 5 or 6 times without issue. Note that you will have to mix the stuff from both sides before use - this is likely why it is reusable.
Same here.
Adapter: $8
JBweld: $8
Cheap and horrible case for my phone: $5
Before you replace it, I would attempt to repair it using 2 part epoxy.
I am partial to the "JB Weld" brand, and this variety is perfect for a repair such as this...