Reddit reviews Nanch Small Precision Screwdriver Kit Set,22 in 1 Electronics Screwdriver with Build-in Extension Rod,Repair Tool Kit Compatible With Laptops PC Smartphone Jewelry and other Small Electronics.

If anyone's looking for a nice screwdriver sets that includes a tri-wing, I highly recommend this product: https://www.amazon.com/gp/product/B00QZLV03O

Here's the set. It looks nice, might be time for an upgrade myself!

Nanch Small Precision Screwdriver Set with 22 Magnetic Screwdriver Bits,Repair Tool Kit for Laptop,Smartphone,iPhone,Jewelry and other Small Electronics. https://www.amazon.com/dp/B00QZLV03O/ref=cm_sw_r_cp_apa_i_RTsIDbWN8V2ZF shortly after finishing I went on Amazon and bought this set. Way better than those red screwdrivers!

I carry a nanch precision screwdriver set in my backpack at all times. Other people around me always go to me first whenever they need a screwdriver or some tools to borrow. Its a good feeling

https://smile.amazon.com/Nanch-Precision-Screwdriver-Smartphone-Electronics/dp/B00QZLV03O/ref=sr_1_3?crid=2NK1WCEVGKTZW&keywords=nanch+small+precision+screwdriver+set&qid=1566115135&s=gateway&sprefix=nanch%2Caps%2C148&sr=8-3

Edit: added URL

I really dig this set. The handle is solid and extends. https://www.amazon.com/gp/product/B00QZLV03O/

Oh good, I've never known pcpartpicker to get compatibility wrong. Plus, from what I can see your build looks great. I did want to note that a GTX 1080 will only be different from a cheaper graphics card if you have a monitor that can utilise its power, i.e. one that is 1440p and 144hz (or more). If you're using a monitor with a lower resolution or refresh rate, say a 1080p/60hz monitor that's the most common, I'd consider a cheaper graphics card (like a GTX 1060 6GB), because there will be noticeable difference in performance. Just wanted to make sure you knew that. : ) I see a lot of people overspend just to have a GTX 1080 even though there will be no difference at all in what they can see on their screen.

Getting to the question you actually asked: So people like to say that you can build the entire computer with just a #2 Phillips screwdriver (that's the "regular" size). This is basically true. I'd recommend spending $10-15 on an extra long scewdriver (10 to 12 inches). The length really helps when working deep in the case. I bought one after my second build, and since then the builds have been SO much better. I have one like this one and it's great. Especially since it's magnetic.

Another extremely useful item is a magnetic scew/bolt tray, like this one will save you a LOT of time and trouble.

The one and only screw on most builds that doesn't take a standard screwdriver is the tiny screw that holds m.2 SSDs into place. I didn't see if you have an m.2 SSD or a 2.5" one. Either way, a small precision screwdriver set can be very useful. I own this one which is extremely high quality, but there are much cheaper versions out there. They come in quite useful around the house too.

So long story short, you can basically get away with just a cheap standard screwdriver, but a couple of extra tools can make your life a lot easier.

For anyone that’s interested buy this one


I actually own both of these sets and I almost never use that cheap plastic driver anymore. Plus the one I linked the driver itself extends and it has longer bits so having both bit sets is still useful if you already have the other set. The driver in the one I linked is worth the price alone.

Have done exactly what you are asking.

I am typing this on the lowest end 9570 (refurbished Dell Outlet) with an upgraded SSD and 97whr battery.

These are the exact parts and where I got them:

https://www.walmart.com/ip/EBK-6GTPY-Battery-Compatible-Dell-XPS-15-9560-9570-Precision-5520-M5520-Replacement-5XJ28-5041C-H5H20-5D91C-Laptop-6-Cell-11-4V-97Wh-12-Months-Warran/987434458

​

https://www.amazon.com/gp/product/B079QH5KW1

​

https://www.amazon.com/gp/product/B073SBX6TY

​

https://www.amazon.com/gp/product/B01BGZEVHU

​

You will have to take out the HDD to put in the bigger battery. You may also need to change BIOS settings to get the best SSD performance.

​

You will need a special screw driver to open the case, use the biggest one that will fit and remember rigthty tightly lefty lucey. :)

https://www.amazon.com/gp/product/B00QZLV03O

​

Look online for how to open the case. Don't forget the two Phillips in the middle under the magnetic plate.

​

Battery life is outstanding.

Overkill for just a T430, but I can highly recommend this kit for laptop work. I refurbish laptops and this is the kit I use and it's quality.

This is what I finally went with.

https://www.amazon.com/gp/product/B00QZLV03O/ref=oh_aui_detailpage_o00_s00?ie=UTF8&psc=1

I used one of those websites that filters out all the amazon reviews from incentivized users and such. I literally just ordered it so I can report back if you'd like once I actually receive the product.

Yeah, I've got 2 sets of those. Problem is 2 of the holes on the Vive controller where the screws are located (the two eye holes at the bottom) are too deep for my nubby torx screws to reach the bottom of them.

I just ordered these. Think they should be long enough

actually i was really curious about this so i googled/amazoned some more:

http://www.amazon.com/Screwpop-SP2BP-Black-Mutli-Tool/dp/B006GER8S6/ref=sr_1_42?s=hi&ie=UTF8&qid=1449722623&sr=1-42&keywords=pocket+screwdriver

http://www.amazon.com/SE-7525TS-10-Piece-Precision-Screwdriver/dp/B002Q836V4/ref=sr_1_22?s=hi&ie=UTF8&qid=1449722523&sr=1-22&keywords=pocket+screwdriver

that one has what youre looking for but its not a 1/4" hex so itll be a pain to find replacements (those bits look kinda cheapy)

http://www.amazon.com/Bostitch-Office-Stanley-Screwdriver-66-344-2/dp/B00ZPSO8GE/ref=sr_1_3?s=hi&ie=UTF8&qid=1449722523&sr=1-3&keywords=pocket+screwdriver

That one is a 5mm bit, close to 1/4" but not quite (1/4" is 5.5mm)

http://www.amazon.com/dp/B00QZLV03O?psc=1

your best bet is that one with a box of #2 phillips/slotted from home depot or amazon...

Nanch Precision Small Screwdriver Set with 22 Bits,Repair Tool Kit for Computer,Smartphone,iPhone,Game Console and other Electronics Devices https://www.amazon.com/dp/B00QZLV03O/ref=cm_sw_r_cp_apa_snfPAb4GJZJYE

I love this set. I have 2.

Is this ok? I really can’t tell good quality tools from cheap tools so idk.

I own the ifixit set and have a ton of mileage on it, but I also purchased the Nanch Precision set for less and consider it a superior product, though both are good.

Just a screwdriver probably. I have this set and it works nicely

https://www.amazon.com/Nanch-Precision-Screwdriver-Smartphone-Electronics/dp/B00QZLV03O/ref=sr_1_4?ie=UTF8&qid=1550812825&sr=8-4&keywords=screwdriver%2Bset%2Belectronic&th=1

Laptop: On-site warranty

Printers: Outsourced service / toner

Cisco IP Phones: Smartnet

It's not worth the time of our staff (both IT and the non-IT staff affected) to troubleshoot hardware issues. We just swap it out with a spare, then call in service or RMA the hardware.

Re: screwdriver sets... I wouldn't spend the extra money on the iFixIt brand stuff--it's pretty much the same as the Amazon link. Personally I've found most of them are the same... it just depends on the case you get and the case included with that is pretty crappy (it's essentially the VASTAR one but colored blue.. once that plastic insert gets lost or damaged [it'll probably arrive damaged, too] those bits are going to be flying all over the place and be impossible to close the case). I'd go for something like this: https://www.amazon.com/exec/obidos/ASIN/B00QZLV03O/ezvid02-20

Nanch tools on amazon have been awesome for me. Even hold on up to Spydercos loctite

NANCH Precision Screwdriver Set with 22 Magnetic Bits for all Electronics Devices,23-piece https://www.amazon.com/dp/B00QZLV03O/ref=cm_sw_r_cp_apa_3jxIybS1PB0TZ