Reddit reviews Powerbuilt 648796 Honda Cranks Pulley Removal Tool

We found 3 Reddit comments about Powerbuilt 648796 Honda Cranks Pulley Removal Tool. Here are the top ones, ranked by their Reddit score.

Crank pulley removal tool for most Honda and Acura enginesFor removal and installation of crank pulley boltDesigned with hardened chrome molybdenum steel constructionIncludes one pulley removal tool2.2 inches by 5.8 inches by 5.9 inches; 1.3-pounds; lifetime warranty

Check price on Amazon

3 Reddit comments about Powerbuilt 648796 Honda Cranks Pulley Removal Tool:

u/FesteringNeonDistrac · 3 pointsr/Cartalk

Does it use the special crank pulley holder tool like newer hondas? I never had any success with an impact gun, always had to use the crank pulley tool with one breaker bar wedged in the suspension, with a second breaker bar on the bolt. Seemed to give in to constant force not the impact gun.

u/Swift06 · 1 pointr/AskMechanics

Okay, I've gone through this before. Luckily I had access to a shop. The 1/2" snapon impact couldn't get it, but the 3/4 did. You probably don't have a 3/4, so here are some ideas.

- As others have said, the breaker bar bump start trick. You'll want to be careful holding the socket on the bolt in case it pops off. Heat is definitely your friend. Get that bitch orange hot if the starter bump trick doesn't work, then try the starter bump trick again when it's hot. I did this trick on an accord a week ago with no heat and it went perfectly well with a Craftsman 1/2" breaker bar and a deep well impact socket.
  
  2 - There's a special Honda crank pulley tool. Use this with lots of cheater bars.
  https://www.amazon.com/Powerbuilt-648796-Cranks-Pulley-Removal/dp/B0000TMLWQ
  
  3 - Find a shop and tell them you just want the bolt broken loose. They might hook you up for free or charge you only a little bit of labor if they have better tools. If they get it loose, just have them snug it back in. The engine rotates clockwise so the bolt can't loosen, it'll only get tighter on your way home, no worries about it coming out.
  
  Good luck.

u/demon6soul · 1 pointr/MechanicAdvice