Reddit reviews Wera 05073675001 Kraftform Micro-Set/12 Sb 1 Screwdriver Set for Electronic Applications, 12 Pieces
We found 13 Reddit comments about Wera 05073675001 Kraftform Micro-Set/12 Sb 1 Screwdriver Set for Electronic Applications, 12 Pieces. Here are the top ones, ranked by their Reddit score.
Kraftform Micro set in a robust pouchAnti-roll feature and swivel cap for rapid twistingThe Wera Black Point tip offers an exact fit and optimum corrosion protectionHolding function for TORX screwsE.g. for electricians, opticians, precision mechanics, jewelers or IT hardware fitters
I'll second Wera. I have a similar set in a nice little roll,
https://www.amazon.com/Wera-Kraftform-Micro-Set-12-5073675001/dp/B009ODV0PI/ref=pd_sim_263_6?_encoding=UTF8&pd_rd_i=B009ODV0PI&pd_rd_r=6YHP7JC4ST8CQX0TRK4R&pd_rd_w=3ytyn&pd_rd_wg=3Vvlr&psc=1&refRID=6YHP7JC4ST8CQX0TRK4R
and I have used them extensively with no damage to the heads. Highly recommended.
https://www.amazon.com/dp/B009ODV0PI
They're expensive, but they WORK.
Uh, 62$ cad is what I paid for this set and that seems pretty cheap for the quality of the tools?
https://www.amazon.ca/gp/product/B009ODV0PI/ref=ppx_yo_dt_b_asin_title_o00_s00?ie=UTF8&psc=1
For a hobbyist that doesn't go ape on them should last a lifetime?
Wera
https://www.amazon.com/dp/B009ODV0PI/ref=cm_sw_r_cp_apa_i_AppcBbC9EMEYJ
https://www.amazon.com/dp/B01BSKR35U/ref=cm_sw_r_cp_apa_i_8qpcBbVBY7VE3
I can highly recommend this set of Wera precision screwdrivers.
I can't speak for Wiha, but I use a ratcheting multi-bit holder Wera screwdriver that has been used at my job for over 3 years, 40 hours a week. I use the screwdriver HEAVILY, I mean nearly constantly over the span of each 8 hour work day. Only last week did the ratcheting mechanism start giving out. I'm going to be buying another.
HOWEVER. Since you're specifically asking for a micro-bit set, I have coworkers that use wiha for that and they seem to do the job fine. Don't know if Wera has similar stuff, I assume they do, but from what I've heard about them and seen first hand both will serve you fine, so go with whatever is cheaper. If it's ratcheting consider that a bonus, saves a lot of wear and tear on the old wrist.
EDIT:Yes Wera does carry a micro "set", it's individual drivers in a case. $41. And yes, Individual drivers are always stronger than a multi-bit single driver if you're going for true BIFL factor here.
https://www.amazon.com/Wera-05073675001-Screwdriver-Electronic-Applications/dp/B009ODV0PI
So given the choice between these two:
Wera Kraftform Micro-Set, 12 Pieces
Wiha Micro Bit Set, 39 Bits
and the roughly equivalent price, I should still go with the individual drivers for BIFL.
That looks pretty nice, but I was wondering about the specific Japanese set AvE talked about for a dollar. I've already got the Wera precision set for electronics.
Only a month late getting back to you on this...
The three case with three handles are all torque screwdrivers
Links to everything here:
https://www.amazon.ca/gp/product/B009ODV0OE/ref=od_aui_detailpages00?ie=UTF8&psc=1
https://www.amazon.ca/gp/product/B01BSKR35U/ref=od_aui_detailpages00?ie=UTF8&psc=1
https://www.amazon.ca/gp/product/B009ODV0PI/ref=od_aui_detailpages00?ie=UTF8&psc=1
https://www.amazon.ca/gp/product/B00E8HM9N2/ref=od_aui_detailpages00?ie=UTF8&psc=1
https://www.amazon.ca/gp/product/B001555G80/ref=oh_aui_detailpage_o00_s00?ie=UTF8&psc=1
https://www.amazon.ca/gp/product/B01H88FP24/ref=oh_aui_detailpage_o00_s00?ie=UTF8&psc=1
If you are doing any controls work, pick up Wera screw drivers they are the best screw drivers for terminal blocks, very good steel, have never had a tip break or striped a screw.
https://www.amazon.co.uk/Kraftform-Micro-Set-Screwdriver-electronic-applications/dp/B009ODV0PI
German "Wera Kraftfortm" tools only
https://www.amazon.com/Wera-Kraftform-Micro-Set-12-5073675001/dp/B009ODV0PI/ref=pd_sim_469_58?_encoding=UTF8&pd_rd_i=B009ODV0PI&pd_rd_r=6FPSJM18T1DH9XRB69R8&pd_rd_w=TU3HU&pd_rd_wg=Fkh24&psc=1&refRID=6FPSJM18T1DH9XRB69R8
and
https://www.amazon.com/Wera-05051024001-Kraftform-Bitholding-Screwdriver/dp/B001HSNHM2/ref=sr_1_3?s=power-hand-tools&ie=UTF8&qid=1493822380&sr=1-3&keywords=wera+tools
Can't recommend these enough
Multitools are universally crap I found.
I use one each of these which is as close as I'll get to multitools:
https://www.amazon.co.uk/dp/B009ODV0PI/
https://www.amazon.co.uk/dp/B000X1R2K2/
Both come with pouches and loops so you can transport them or stick 'em on your batbelt if you fancy it.