Reddit reviews XOOL 80 in 1 Precision Set with Magnetic Driver Kit, Professional Electronics Repair Tool Kit with Portable Oxford Bag for Repair Cell Phone, iPhone, iPad, Watch, Tablet, PC, MacBook

I can tell you that replacing the battery and both sticks in my Vita Slim took less than 20 minutes. You can find good quality analog sticks for only a few dollars each. I replaced mine for the same reason as your issue: one of the sticks was constantly drifting (it was my right one, not my left one.)

I got these:

https://www.amazon.com/gp/aw/d/B06Y2BXMWP/

I like them way, way more than the stock ones. The little textured rings on them make using the sticks significantly more comfortable. They feel a little tighter than the stock ones, too (in a good way.)

I've been super happy with them, and have put in dozens of hours since installing.

I used iFixit's guides (because of course I did.)

https://www.ifixit.com/Device/PS_Vita_Slim

Make sure you get a replacement battery while you're at it, too. You have to remove the battery to replace the sticks, so it's stupid to put the old one back in.

Also, I can't stress enough how important it is to have the right tools when you do this. A small spudger and proper tweezers, if nothing else, is essential. The ribbon cables are tiny and easily damaged, so having the right tool will make all the difference. Same goes for prying the outer shell open.

I have this kit, which has everything you need to open up and work on pretty much any small piece of consumer electronics you can think of. It's expensive, but totally worth the money.

https://www.amazon.com/Precision-Screwdriver-Magnetic-Professional-Electronics/dp/B0718ZM6R1/

If you don’t care about name brands, same stuff for $23

This is a really easy repair - most of the time, you will only need to a few screws from the bezel. I have replaced a lot of laptop screens; it generally takes about 15 minutes when you become proficient or about an hour if it is your first time.

As others have stated, the repair should not be too difficult if you do it yourself. Depending on the make and model of your laptop, there are likely half a dozen videos on Youtube or iFixIt.

When I need a screen, I purchase from this website. I have already selected Dell from the list of available brands. On the bottom of your laptop, thre should be a model name and model number. Once you obtain this information, you just select the model name from the list and then choose your model number. From there, you should only have two options, which will be based on your preference: matte or glossy screen finish. I prefer matte finishes as they are less likely to hold onto fingerprints and "stain smear". Side note - somtimes LCDs can have a connector on the left or right. In this case, you will want to dissect your laptop first to determine which screen you need.

You may be able to get a screen cheaper on eBay, but I like this website and have been ordering from them for years. They always have the screen delivered before the ETA and they pack them really well. I have never received a bad screen from them. Good customer service, too. They are legit.

You can check the site to see if they have a replacement video for your laptop - I think it should be listed on the pages that shows you the laptop screen for your computer in the lower portion of the screen (past the section where they offer you tools / accessories for your repair. See if it is something you are comfortable doing on your own before you get started. I would recommend getting your tools / accessories from Amazon. They have a really nice set here.

If you decide to do it yourself, I would just advise paying special attention to the following areas:

• Battery - I would recommend removing the battery from the computer, even if the video does specify you do this.
  
• Bezel - when removing, check to ensure you have removed all the screws before prying. A lot of times, there is ALSO adhesive keeping the two pieces together. Do not be afraid to pry, but be aware that this can cause the bezel to crack or snap.
  
• Screen - Ensure you remove the plastic cover from the front before you reinstall the bezel, but not before securing it using the screws into the bracket.
  
• Back of the Screen - When removing / securing the connector, be especially careful not to damage the pins or overly bend anything. They can be easily damaged if you are not careful. There should be two little teeth on both sides that slide into place when it is fully secured. If you removed the tape during the removal process, ensure they gets replaced to properly hold the connector in place.
  
• Before completion - Obviously you will also want to ensure the screen works before replacing the bezel.
  
  I think you should be fine doing this yourself. If you get stuck, you can PM me.

Actually, not that this matters but he is using THIS kit. I have used them at work and they are very good for the price point, but are much flimsier than the iFixit driver and tend to fall apart after about 6 months of regular use.

After watching the rest of the video it seems like it is a bit, although not in a haha way but more in a "we gave an ingnorant person tools and no instructions" way.

The tech saw the realtree camo and said, eh... not today Bubba... not today.

Honestly though, go to Amazon, look for HP model # replacement screen.

Buy a 19.99 dollar laptop repair tool kit. https://smile.amazon.com/XOOL-Precision-Magnetic-Professional-Electronics/dp/B0718ZM6R1/ref=sr_1_1_sspa?crid=1CMJEN7VSCGBV&keywords=laptop+repair+tool+kit&qid=1572397935&sprefix=laptop+rep%2Caps%2C268&sr=8-1-spons&psc=1&spLa=ZW5jcnlwdGVkUXVhbGlmaWVyPUEyQ1BETU9PUFNEMEdMJmVuY3J5cHRlZElkPUEwMDAyMzI0MzRDMUozTFdLT1U4UyZlbmNyeXB0ZWRBZElkPUEwNzg5MTQ3MTJIRzcyUDVFS0NJViZ3aWRnZXROYW1lPXNwX2F0ZiZhY3Rpb249Y2xpY2tSZWRpcmVjdCZkb05vdExvZ0NsaWNrPXRydWU=

Do it yourself.

Total cost is gonna be around 60 to 100 bucks, with screen and tools.

If you’re going to be opening up laptops, might as well invest in quality tools.
$21 “iFixit” kit.

I don’t know what your laptop needs, but I’m
99% sure that this’ll have what you need and then some.

Amazon Link

https://www.ifixit.com/Guide/PlayStation+4+Power+Supply+Replacement/24719

Philips #1 and TR9 Torx

You should be able to get a kit that has a bunch of standard screw bits from Lowes, Home Depot, or Walmart. Amazon has precision screwdriver kits with other tools for common tech repairs. I have this one and it works well.

I just got a cheap one on amazon, but if you pull stuff apart frequently, you may want to pay the ~$20 for a set of tech bits

XOOL 80 in 1 Precision Set with Magnetic Driver Kit, Professional Electronics Repair Tool Kit with Portable Oxford Bag for Repair Cell Phone, iPhone, iPad, Watch, Tablet, PC, MacBook https://www.amazon.com/dp/B0718ZM6R1/ref=cm_sw_r_cp_api_i_cNpHDbZ0J0BZQ

Bro... https://www.amazon.com/dp/B0718ZM6R1/ref=cm_sw_r_cp_apa_i_n.PyDbEWT98RR

I use this for work and it's pure gold.

You're setting yourself up for a fire or you could spend 20 bucks and get a toolkit.

I use this for almost everything: https://www.amazon.com/dp/B0718ZM6R1/ref=cm_sw_r_cp_api_i_ke6RCbBTP6KWJ

Screen: https://www.amazon.com/dp/B01MCVPO9Q/ref=cm_sw_r_cp_awdb_t1_9QJWDbYMTVHP6

Tools:
https://www.amazon.com/dp/B0718ZM6R1/ref=cm_sw_r_cp_awdb_t1_ETJWDb4BP4WG1

I'm sorry, I can't find the lens anywhere.

can ibuy this one instead? since its a Little lesser and should be the same type?

80 in 1 Precision Screwdriver Set with Magnetic Driver Kit, Professional Electronics Repair Tool Kit with Portable Oxford Bag for Repair Cell Phone, iPhone, iPad, Watch, Tablet, PC, MacBook and More https://www.amazon.com/dp/B0718ZM6R1/ref=cm_sw_r_wa_apa_lYOYBbBBN58ZQ

Hmm, maybe invest in a kit like this: https://www.amazon.com/dp/B0718ZM6R1/ref=cm_sw_r_cp_apa_i_wdTvDb69G7GWN. Not sure if they have specifically what would help, but they might.

$70 is pretty expensive for the tools listed. You can cut the cost by nearly half if you just go on Amazon and look for a phone repair kit, (I have this one: https://www.amazon.com/dp/B0718ZM6R1/ref=cm_sw_r_cp_apa_i8BIAbZ106DHH )

This includes most of what you'll need, the only thing missing is a source of heat and soldering iron.


For heat you can use a heat gun (low setting, these can get really hot!) or even a hair dryer/hand warmers will do in a pitch, although it will probably take longer.

Thanks for this, Im already worried about one controller failing, I'll definitely grab another set and see if I can't repair these for a backup.