Best skateboard hardware according to redditors
We found 63 Reddit comments discussing the best skateboard hardware. We ranked the 33 resulting products by number of redditors who mentioned them. Here are the top 20.
16. Loaded Boards Button Head Longboard Skateboard Hardware Bolt Pack w/Hex Tool (1.5 inch)
1 mention
From left to right, the boards are the Tan Tien, Dervish Sama, Icarus, and the Boosted Board. Tan Tien and Dervish Sama are more of my cruising boards with the Icarus a carving board. I mostly ride the Dervish and my wife rides the Tan Tien (since it's smaller). Also bought and returned the Loaded Overland (didn't like it as much)
The stands are the guitar stands from Amazon mentioned here a lot. Here is the link: https://www.amazon.com/gp/product/B00LBKFYUO/ref=oh_aui_detailpage_o02_s02?ie=UTF8&psc=1
I tried out different trucks and wheels and found the orangatang 80a to be the best for me (same as on the Boosted Board). The 2 on the left have Caliber II trucks. I like the Caliber trucks since they spring back to neutral position quickly which is great for cruising and is very stable. The Icarus is meant for carving so it has looser Paris v2 trucks. I tried the 80mm Orangatang Kegal wheels on these boards and always managed to get wheelbite (and thus crashing) so I went with 70mm wheels and can ride without worrying
Nose and tail guards also from Amazon. Highly recommended as these went flying into the curb a few times and no damage to the board: https://www.amazon.com/gp/product/B06XGJ8PHM/ref=oh_aui_detailpage_o02_s03?ie=UTF8&psc=1
Hope this helps!
A Place for Your Skateboard, Store or Display in Style with an Original Skateboard Stand | The Origami Skate Rack by Skater Trainers https://www.amazon.com/dp/B07CT18DH9/ref=cm_sw_r_cp_apa_i_1vzHDbH0VRMZE
Parking Block Skateboard Storage, Display, Organizer - Portable Stand https://www.amazon.com/dp/B01MYZXL42/ref=cm_sw_r_cp_apa_i_swzHDbRFVE5AT
Not sure if this right but Maybe close
oh no, I use a bash guard similar to these to protect the ends when i pick it up or drag it
amazon has some ~8 dollar skateboard/longboard nose/tail guards.
​
Edit: Amazon Nose Guard
I bought a set Fireball Dragon Stainless Steel Skateboard Hardware Set
They have up to 2"
https://www.amazon.com/dp/B073HF53XN/ref=cm_sw_r_cp_apa_eKIXAbASXT9HW
Which board do you have? If you have the V2 that comes with an SR battery it sounds like you would need risers and button head hardware (the screws) that is 1.5 inches long
https://www.amazon.com/Loaded-Boards-Longboard-Skateboard-Hardware/dp/B077XNHZPN?ref_=ast_sto_dp&th=1&psc=1
Here is it for someone interested.
Yo this is such good advice! I have a Maestro as well, and the first couple major dings really stung, and I was pretty bummed. But it ultimately still rides the same, and I would rather have taken the hits and had fun than been all dainty all the time. That being said, I have reglued delams, DIY'd fiberglass and epoxy wrapped around the edges, nose, and tail... there's stuff like this https://www.amazon.com/Skateboard-Longboard-Nose-Guard-Black/dp/B06XGJ8PHM/ref=sr_1_2_sspa?ie=UTF8&qid=1520644901&sr=8-2-spons&keywords=longboard+nose+and+tail+guard&psc=1 never tried it because it looks like it would get in the way more than anything, but it exists.. At the end of the day, boards get torn up, best to just accept it for what it is and have a blast.
here
These have worked well for me.
Depending on the thickness of the board, you may need to loosen them up or tighten them before applying. To avoid scratches and grooves, I’d open them up a little, make sure they’re on straight, then squeeze them tight. They’re made up of flexible metal segments under a rubber casing, so shaping them is sort of like bending stiff wire.
They are a little shapeable, so they’ll fit most designs with a little bending/molding.
I'm not sure what OP is using, but I bought these.
I need to get a few more.
Ya gotta get longer hardware and a pulley conversion kit too, will edit this comment and add all links
Edit:
TROUBLE SKATEBOARDS Riser Pads... https://www.amazon.com/dp/B07HDT7JZ7?ref=ppx_pop_mob_ap_share
(I currently have 1/2 + 1/2 + 1/4 risers on just to be extra safe from the wheels biting the bottom of the mini, it's plenty)
Slick Revolution Wheel Pulley... https://www.amazon.com/dp/B07Q3WC9VR?ref=ppx_pop_mob_ap_share
Fireball Dragon Stainless Steel... https://www.amazon.com/dp/B073HD2TRP?ref=ppx_pop_mob_ap_share
And of course the wheels themselves:
Slick Revolution 120mm Purple... https://www.amazon.com/dp/B07VHZV2BJ?ref=ppx_pop_mob_ap_share
You need this in 1.5”
Loaded Boards Button Head Longboard Skateboard Hardware Bolt Pack w/ Hex Tool (1.25 inch) https://www.amazon.com/dp/B077XQPZZV/
Amazon - https://www.amazon.com/aiMaKE-Skateboard-Longboard-Guard-Black/dp/B06XGJ8PHM
Lol i just found the same but better ratings and a bigger size selection
https://www.amazon.com/dp/B01JH4BPJE/ref=sspa_mw_detail_0?psc=1&th=1
Haha sorry, spelled it wrong "Boardnamics"
If you have a backpack rn you really like but it doesn't have straps, you can get a board hook. There's one that was a Kickstarter (link) and sadly all sold out, but I found one similar on Amazon for $8.99 (link). It straps to your backpacks shoulder straps. I got it for my mini x👍🏼
You get hook things you can add on to most backpacks. I got one and it works but the bottom of the board does swing around a bit so I would use a strap just to hold it in place.
https://www.amazon.com/YYST-Backpack-Attachment-Carrying-Skateboard/dp/B07LGM869B
I'm up cause I'm in pain.
I <3 Get Lucky by Daftpunk.
Skateboard bearings would be cool for my husband.
Nah you'll be fine. They are good for getting the wheels a little tighter and reduce side to side friction, making bearings last longer according to the science behind it. You could get a 100 pack here on Amazon so you never run out.
I lost a few here and there myself, they are easy to lose track of being so small & sometimes they stick to the wheel from grease.
I'm using this mount I found on amazon and the diyeboard 5055 motor
you could get this
https://www.amazon.com/YYST-Backpack-Attachment-Carrying-Skateboard/dp/B07LGM869B/ref=sr_1_1?dchild=1&keywords=skateboard+deck+hook&qid=1569807280&s=gateway&sr=8-1
SilverHandle: https://www.amazon.com/Craft-Ride-SilverHandle-Onewheel-Carrying/dp/B07MD12S2N
Spectrum Magnetic Fender: https://www.amazon.com/Craft-Ride-Spectrum-Magnetic-Onewheel/dp/B07MJ2L1VL
Superow Onewheel Backpack: https://www.amazon.com/gp/aw/d/B07MN2V8F9/
Any suggestions for bash guards or tail guards? I found some on Amazon:
https://www.amazon.com/gp/product/B077CQBC33/ref=oh_aui_detailpage_o00_s00?ie=UTF8&psc=1
but wondering if there are any other options to consider. gonna likely get one for my Kut-thaka and even my Tarab but not sure if having one will make beginner level free style(for the Tarab's case) difficult. I just wanna take as much care for these decks as I can
https://www.amazon.com/Fireball-Dragon-Stainless-Skateboard-Hardware/dp/B07QBQ6TKW
Here's some I found http://www.amazon.com/Standard-Speed-Washers-100-Pack/dp/B00388S91S/ref=sr_1_2?ie=UTF8&amp;qid=1405561903&amp;sr=8-2&amp;keywords=speed+rings+longboard
I got these ones a while ago and they work decently well. Not super bright but enough to get cars see you. Each one has a built in rechargeable battery.
https://www.amazon.com/dp/B07RJF9JDS/ref=cm_sw_r_cp_api_i_6PVUDbQMZ3TD4
spacers
where do I buy these speed rings? I also have the rattling.
Is it these? https://www.amazon.com/STANDARD-SPEED-bearing-spacers-washers/dp/B004QGAJ4G
Looks like it went up by a dollar lol but still worth it. Skate shops sell these for $25+. Don't buy the kit. Just get the $9 bearings. If you need spacers and washers then buy it separately. It's like $3 :)
http://www.amazon.com/gp/product//B002E2MYSI/ref=twister_dp_update?ie=UTF8&amp;psc=1
Spacers & Washers: These are plastic spacers. I ordered it just to see if there will be any difference. It's not required.
http://www.amazon.com/gp/product/B004QGAJ4G?psc=1&amp;redirect=true&amp;ref_=oh_aui_detailpage_o01_s00
I have these on my board
Sector 9 Bolt Pack Set, Black, 2-Inch https://www.amazon.com/dp/B00803F5JU/ref=cm_sw_r_cp_apa_i_GqGWCbQMJ5WMH
WTS: 2019 Boosted Board Stealth V3 with 320 miles,
ALL YOURS FOR AN EASY $1,000.00 USD or trade..let me know what you got...I am in Central Florida
included is 2 Extended Range Battery Pack,
I have upgraded the pulleys to "Speed Pulleys for Abec11 Refly Longboard Wheels - 97mm 74a,
3 sets (total of 6) belts LithiumCore Boosted Board V2 Belts ( Fits Mini S, Mini X, Plus & Stealth),
Kutrick Boosted Board Kevlar Belts for Boosted Board V2, Mini S, Mini X, Plus, and Stealth,
Bones® BIG BALLS™ REDS® Skateboard Bearings 8 pack,
(2) sets total of 4 Shredlights: Two Skateboard Headlights - Three Brightness Levels - Water Resistant - Easily Removable and Rechargeable,
EXTENDED RISER – FOR BOOSTED,
BASH GUARD M (SINGLE) – FOR BOOSTED BOARDS rear and front boosted board,
FL3D PRO BUSHINGS ( I have both the Hard Blue - 92A and a Soft Grey - 84A .),
WEDGE RISER (SET OF 2) – FOR BOOSTED BOARDS ,
RETRACTABLE REMOTE LANYARD,
Hubro Designs Slimfit Backpack XX (G5.1) - Boosted Board Travel Bag ,
way to many Skateboard Longboard Speed Washers and Spacers Set for Truck Axle Mounting Equipment Accessories, 104pcs, Hardware, Bearing Performance ,
Sector 9 Bolt Pack Set, Black, 2-Inch,
Ampulla Oricycle Rechargeable Bike Tail Light LED - Remote Control, Turning Lights, Ground Lane Alert, Waterproof, Easy Installation for Cycling Safety Warning Light,
DIYE Skateboard Longboard Nose Guard Tail (2 pcs) for Boosted Board V2 V1,
DECK HOOK: Professional Skateboard, Longboard & Electric Skateboard Holder Carrier | Compatible with Most Dual Shoulder Strap Backpack | Adjustable Straps& Hands Free Use,
Merkapa Ratchet Skateboard T Tools,
Sk8ology Carabiner Skate Tool 2.0 Black Red,
Pro Bike Tool Mini Ratchet Tool Set - Reliable and Stylish Multitool Repair Kit for Road and Mountain Bikes - Versatile EDC Multi Tool for Your Bicycle, Home or Work - Hard Case Pouch,
Im sure I am forgetting some things but there it is..
ALL YOURS FOR AN EASY $1,000.00 USD
or trade..let me kln ow what you got...
I am in Central Florida
Hi again, I've been skating for about a month now, but have nerded-out on all of the technical aspects of skating. Also, sorry for the late response.
Softer, larger wheels are always better for rougher terrain, as they have some give; reducing vibrations (giving you a smoother ride), and minimizing damage to the contact patch (the part of the wheel directly in contact with the ground), as well as hanging up less on cracks and imperfections in the ground. And yes, the 60mm SharkWheels are extremely soft, coming in at 73 on the "A" durometer scale. Also, installing the shock/riser pads is exremely straight forward. Just remove the screws that attach your trucks to the deck, and place the pads inbetween the trucks and the deck when you re-attach them. Since using riser pads increases the space between the top of your mounting hardware, and the bottom of the truck baseplate, you'll need some longer screws. (I know I said you'd need 1/8" risers, but you'll actually need 1/4" ones. Here's a link to a set of risers and new screws: https://www.amazon.com/Longboard-Riser-Hardware-Black-Risers/dp/B01GVYLLDS?ref_=Oct_CARAsinC_3416211_2&amp;pf_rd_p=615a1383-c417-5ea4-9e60-3dea50680d38&amp;pf_rd_s=mobile-hybrid-5&amp;pf_rd_t=30901&amp;pf_rd_i=3416211&amp;pf_rd_m=ATVPDKIKX0DER&amp;pf_rd_r=23AB060KWQ2M6XTT79SF&amp;pf_rd_r=23AB060KWQ2M6XTT79SF&amp;pf_rd_p=615a1383-c417-5ea4-9e60-3dea50680d38)
About changing boards, you don't need to buy a new skateboard unless the deck has cracked or snapped, the nose and tail have been ground down to a razor edge, or the deck plys have delaminated. If you want to improve the quality of the wheels that you have, I suggest cleaning or replacing the bearings in their core. Also, when you remove your wheels from the truck axles, make sure to keep the two speed rings that are on the axle. Depending on the wheels you have, there may be a metal spacer between the bearings. If there is no spacer, you'll want to purchase a set of bearing spacers, since they allow you to tighten your axle nuts all the way down, and reduce damage to bearing races since they properly allign the inner races. Here's a link to the spacer set I used, which also come with replacement speed rings:
https://www.amazon.com/Fireball-Spacers-Washers-Skateboards-Longboards/dp/B01GIGU2SE/ref=sxin_2_ac_m_pm?keywords=bearing+spacers&amp;pd_rd_i=B01GIGU2SE&amp;pd_rd_r=8f7f6dbf-9e1d-4fe8-b773-f88fd58cb1b6&amp;pd_rd_w=XHSmr&amp;pd_rd_wg=JYzjS&amp;pf_rd_p=52ddbacc-f25e-4731-abd8-005c535b500a&amp;pf_rd_r=WYCXRWENHXVGEBSRAHYH&amp;qid=1562015024&amp;s=gateway&amp;sprefix=beating+spacer
Aandd here's two videos that detail the entire bearing removal/cleaning process from start to finish:
https://youtu.be/QqSOBvVDNwQ
https://youtu.be/epLPX7sRQXI
Side note: The "A" and "B" durometer scales are used to measure wheel hardness. The higher the durometer, the harder the wheel. Both scales start at 73, and max out at 100, with the "B" scale being 20 points lower that the "A" scale for a wheel of the same hardness (a 100B wheel would be equivalent to a 120A wheel).
Hope this helped :)
Thanks for watching! Yeah, the boosted board is definitely a good beginner board but the price makes it a big investment. I assume most beginners would look for something cheaper. The bash protectors are the "Skateboard Deck Guards" link: https://www.amazon.com/dp/B077CQBC33?ref=yo_pop_ma_swf. I've had the back one slide off a bit so I hope they last.
What board do you have? Are you not taking off the old risers? Any case; here are screws that'd work for you, make sure to get the button top screws and not counter sunk.
They fit pretty tight I have not had them fall off or wear out yet and I have had them for about a week and I got them from amazon
https://www.amazon.com/gp/product/B06XGJ8PHM/ref=oh_aui_detailpage_o04_s01?ie=UTF8&amp;psc=1
These are the lights I seem to have seen mentioned by most users here and on Youtube video reviews I've seen.
[SELL]
Meepo 1.5 (less than 100 miles), comes with:
[ShredLights]
(https://www.amazon.com/gp/product/B075KWYZZY/ref=oh_aui_detailpage_o08_s00?ie=UTF8&amp;psc=1) Costed $44.99
Nose and tail guard Costed $13.99
[Red tail light] (https://www.amazon.com/gp/product/B015IEJ0GC/ref=oh_aui_detailpage_o07_s00?ie=UTF8&amp;psc=1) Costed $18.37
[Longboard Tool] (https://i.imgur.com/adtDPzF.jpg)
[Extra trucks and screws from the recall] (https://i.imgur.com/MAcuYoi.jpg)
[Remote (no wrist strap, sorry)] (https://i.imgur.com/Wao1vfJ.jpg)
[Charger] (https://i.imgur.com/yolnbbV.jpg)
[Wall mount + 4 screws] (https://i.imgur.com/8yOyrHq.jpg)
I'm in the Bay Area (Mountain View). $450 OBO
Hey I bought it on amazon. Here’s the link:
https://www.amazon.com/Max-Pro-Skateboard-Protector-Longboard-Protection/dp/B077CQBC33/ref=mp_s_a_1_3?keywords=longboard+guard&amp;qid=1550619680&amp;s=gateway&amp;sr=8-3
I buy this four pack. They’re the same quality as boosted belts, but are significantly cheaper.
I've looked into those any thoughts on these https://www.google.com/url?sa=t&amp;source=web&amp;rct=j&amp;url=https://www.amazon.com/Max-Pro-Skateboard-Protector-Longboard-Protection/dp/B077CQ7HFH&amp;ved=2ahUKEwjhlaPD8LHhAhWBsJ4KHQRuBrEQFjAAegQIAxAC&amp;usg=AOvVaw0qdfmc93WezoB1RCCVTBOa