Best vacuum attachments according to redditors
We found 92 Reddit comments discussing the best vacuum attachments. We ranked the 51 resulting products by number of redditors who mentioned them. Here are the top 20.
We found 92 Reddit comments discussing the best vacuum attachments. We ranked the 51 resulting products by number of redditors who mentioned them. Here are the top 20.
Yeah I guess... My favourite attachment is a little one with a brush end. Pretty much the best attachment for situations like this one.
$7 on Amazon- pretty good
http://www.amazon.com/Micro-Vacuum-Attachment-Kit-Piece/dp/B000BSJCLY/ref=sr_1_5?ie=UTF8&qid=1397423536&sr=8-5&keywords=miele+vacuum+attachments
This might be interesting:
https://www.amazon.com/dp/B07C4G7D9M/ref=cm_sw_r_cp_awdb_t1_NUFQDb7CQ4GPD
I strongly discourage using compressed air, as you are blowing dust and other bits further INTO the devices.
I highly recommend having the pressure inside the panel higher than outside. Put the fan low in the panel, sucking air in (through a filter). A small vent high in the panel without a filter just a cover.
this one looks like a pretty close match
https://www.amazon.com/Universal-Attachment-Interface-Flexible-Anywhere/dp/B079F8RMYB
Vacuum detailing attachments are probably your best bet.
For $1,000 your decision is really about canister or upright... what you're most comfortable using. And getting the most convenience features you can.
I wouldn't give extra credence to pet-specific models. Any Miele will do a good job. I have two cats and a cat tree that gets matted with hair and a sofa that gets covered in hair daily. My Compact C2 does a fine job pulling hair up.
You'll want a Miele STB 101 Mini Handheld Turbobrush or Miele STB 20 Flexible Mini Handheld Turbobrush for furniture. (Neither are really mini... they're big compared to brushes on mass market vacuums.)
You'll need a floor head that is electrically powered (not powered by air flow) for your carpet, which is something to watch for if you're buying a canister model.
My one annoyance with my Compact C2 is the foot lever for raising and lowering the height of the head. It really needs to be a knob because there are 5 settings and if you're on setting 2 and want setting 1, you have to press it 7 times, all the way up to 5 and then back down to 1. It's a horrible design.
Agreed. I'm not a fan of canned air, personally, though. Problem with it is it often blows so cold it condenses moisture into the airstream. (This varies by temp and humidity, obviously.) Blowing small bits of moisture at high speed into electronics is bad, m'kay?
I like to use one of these kits, hooked up to a small shop vac. I put the hose on the blower end, loosening the main bits. After that, I swap the hose back to sucking and grab anything that didn't basically just blow off down thew street. I rarely use the tiny attachments, actually, but they are useful from time to time.
Could try something like this:
http://amzn.com/B000BSJCLY
Hey/u/SoulSister85 I am not a textile conservator, but I am a collection manager in a museum with some very basic knowledge. Here's a few things I would suggest:
- Do not clean or dry clean your quilt without repairs being made first. It's a sure fire way to have it fall apart more. Try vacuuming instead to try and get some dirt off the fabric. I personally like these, as they connect to your regular vacuum. If you want to lesson the suction just drill a few holes in the plastic. If you decide later you want to cover them you can do so with duct tape. https://www.amazon.com/Schneider-Industries-Micro-Vacuum-Attachment/dp/B000BSJCLY Sometimes trying to remove stains will create more damage, especially if you don't know the year the fabric was produced and how it will react. When in doubt do a light test on the back first, but make sure it's not in a section that is essential to the quilt's integrity in case the fabric loses its structure.
- If you decide to display this quilt I would keep it out of direct sunlight and rest it (keep it in an archival/ acid free box in a closet somewhere) at least 2-3 months of the year. This will keep the colors vibrant for years. Don't be afraid to handle it gently- taking it off display and resting it will do more good, even with the handling, than if you were to keep it up full time.
- Think about spending some money on a strong and durable hanging system. This is a good guide of how museums tend to hang textiles https://museum.gwu.edu/hanging-textiles . Ultimately, whatever you do should be reversible, so if for some reason you don't want to hang it anymore all of the material can be easily removed without any damage to the quilt. Using cotton tape on the back of the velcro will ensure the cotton tape and cotton thread are the only things touching the quilt fabric, making sure that nothing sticky or acidic comes in contact with it. Added bonus is you can choose whatever kind of velcro you want (although I would suggest long lines of it for added stability and less pull on your fabric in certain sections). If you want to go the museum route, this is the website I usually get my cotton tape and velcro from https://www.gaylord.com/search?text=velcro
- If you want to try your hand at it, feel free to try and do some simple repairs! Otherwise see if there's a local quilting guild who will be willing to help out or lend guidance. If you want to have it professionally conserved, the person handling your quilt will likely add fabric in to both blend into the pattern and strengthen the quilt. Unless you are dead-set on making this piece museum quality and think it's worth something financially, this might not be the solution for you, only because of the cost involved. If you do want to get some quotes, this is the best resource for finding conservators near you. Just type in your zip code and select "textiles" and certified conservators will pop up. http://www.conservation-us.org/membership/find-a-conservator#.W_zDw3pKhp8
-This is a pretty good resource for general knowledge of quilt repair and conservation, check it out! http://www.quilthistory.com/repair.htm
-What I tell most people who ask me about their sentimental and precious objects they want to display in their home is to balance the object's safety with your enjoyment. Don't sacrifice one over the other. Precious objects are worthless if you can't enjoy them, so hang this baby up and let it bring joy to your home!
​
And of course feel free to PM me if you have any questions. If I don't know the answers I'll try my best to find out for you.
The Compact C1 series is designed to replace the Classic series (the Miele website only shows one model from the Classic series), so you will be getting effectively the same machine but newer. The Pure Suction model can't be paired with an electric head because it doesn't have the power connectors in the hose. You would have to at least buy a new hose if the machine supports it at all, and even the cheapest electrobrush head (the 217) is going to cost $150 USD, pushing your total to $450. At that price point, there are two models that are better than the C1 Pure Suction. On the lower side, you could go with the Compact C1 HomeCare that is only sold by dealers. This one has a turbobrush (not an electrobrush), but that should work so long as the short-yarn pile is fairly loose. I'm not sure about the exact price, but the one at my dealer is around $300. If you can afford to go up slightly in price, then I would recommend the C1 Delphi. It has the basic 217 electric brush and is upgradable to the 228 or 236 brush if you ever get hi-pile carpets. It also comes with the Parquet Twister (a $66 value) which is essential for hardwood floors and is orders of magnitude better than the multihead that comes with the Pure Suction (I have both).
I actually like this attachment. There’s tons of brands. This has adapters KKPOT Universal Vacuum Dusty Brush,Duster Cleaning Attachment Tools with Soft Tube, Vac Hose Accessories Dirt Remove Parts https://www.amazon.com/dp/B07HNWFY77/ref=cm_sw_r_cp_tai_RJBUBbH127A1Z they all work the same. A piece of plastic with tubes to suck up dust. Having holes the tubes go in increases the suction power. Why not 5 stars on all of them? You need to find one that fits your vacuum, that one has adapters. Secondly the tubes after a while will Fall out. Usually only one and you can stick it back in. Great for dusting and getting up little things without worrying it’ll suck up everything else. I like it for getting in cracks. That’s just one brand. In case you need another option.
yoo it's only like 9 bucks. https://www.amazon.com/dp/B079F8RMYB/ref=cm\_sw\_em\_r\_mt\_dp\_U\_DCY7Cb25S0QSX
So ironic this thread popped onto my feed. I have the V8, love it—worth every penny.
But I just moved into a place thats 100% hardwood and the standard head wasn’t doing the trick. Then of course I found out they sell a specialty head for $180+...
Hopped on Amazon, found a $20 dyson hardwood head along with a $10 piece that enables them to snap together. Total game changer
https://www.amazon.com/dp/B07KXNH5P1/ref=cm_sw_r_sms_c_api_i_UvByCbG9FQ90N
https://www.amazon.com/dp/B0779ZKP9W/ref=cm_sw_r_sms_c_api_i_6wByCbTGNB5N5
Edit: Added plain URL
I've not tried this product but we recently bought a new vacuum because our old one was not equipped to deal with the insane amount of hair and it came with an upholstery tool that has felt strips on it to pick up pet hair. It works very well especially on the couch cushions.
Here's a link for the one I have:
https://www.amazon.com/Miele-SPD-Wide-Upholstery-Tool/dp/B002QKMU4G/ref=pd_aw_sim_201_3/147-0515234-6523911?_encoding=UTF8&pd_rd_i=B002QKMU4G&pd_rd_r=5c48e277-35f9-11e9-bbb6-010903285c78&pd_rd_w=hCPZD&pd_rd_wg=uXtEB&pf_rd_p=469620d9-3e90-496d-9dc8-b19f900ba5fe&pf_rd_r=13RHYXP47KYJ90AZCKNQ&psc=1&refRID=13RHYXP47KYJ90AZCKNQ
I believe these work. I haven't tried them but this is what came up when I look at my N79S Amazon order. Replacement Parts for Ecovacs DEEBOT N79 Deebot N79S Robotic Vacuum Cleaner Accessories - Filters+ Side Brush (Pack of 18) https://www.amazon.com/dp/B075XMZGX8/ref=cm_sw_r_cp_apa_8dQQBbBZMN8E5
Hey there. I hope you're doing well and maybe still answering questions in this thread. I really appreciate the time you take to do all these AMAs.
I just picked up a Miele Classic C1 Oympus, but haven't opened the box yet. I'm hoping for a little confirmation that I made the right choice.
We live in a 765 sq.ft. 1BR apartment with hardwood floors, except for the vinyl tiles in the galley kitchen and ceramic in the bathroom. I have low pile FLOR carpet tiles in the dining room, and a few other low pile area rugs. A kitty lives with us too.
We're about to replace our 5'x8' living room rug with this .5" pile wool area rug, and I'm wondering if that's something the default floor brush can handle, or if I should spend another $100 on the Turbo Brush. And since I would then be investing over $400, would I be better off with a different model altogether?
Thanks in advance.
Both have great filtration. Personally, I always go with sealed because I have such terrible allergies. You might find that you want a larger bag. The sealed filtration is worth it to me unless you want the larger bag.
The FiberTeQ and AllTeQ are basically the same thing. However, if you REALLY want something for your hardwoods, I'd really suggest adding on the Miele Parquett Twister brush. It's got way more rotation in the brush for getting in hard to reach places and it's really, really fantastic on sensitive hard flooring. You can't go wrong.
Do I get a finders fee? Edit: Better offering: http://www.amazon.com/ShedAway-Handheld-Pet-Grooming-Attachment-98Q1A/dp/B001U0ONB6/ref=sr_1_1?ie=UTF8&qid=1375816854&sr=8-1&keywords=vacuum+pet+attachment
I have allergies and have been tested as "severely allergic". I take singulair, nasacort AQ, Zyrtec D (as needed), and get allergy shots once a month. So yes it can be done.
Some tips (and most of these have already been said)
Good luck and I hope you guys decide to keep him!
That's funny, I have one too and I have no idea where it came from. I did some searching and found one on Amazing: http://www.amazon.com/Flexible-Crevice-Tool-Vacuum-Hoses/dp/B0017PHQ6S
well.. I always a towel on my consoles, when I don't use them.
best way to clean plastic is this :
https://www.amazon.com/Schneider-Industries-Micro-Vacuum-Attachment/dp/B07T1TC838?ref_=Oct_MWishedForC_11333716011_2&pf_rd_r=6J64W607NWQ9BHG774BV&pf_rd_p=56e0c90b-984b-586a-87ab-0e9a76996833&pf_rd_s=merchandised-search-10&pf_rd_t=101&pf_rd_i=11333716011&pf_rd_m=ATVPDKIKX0DER
You don't use any chemical product which can damage the plastic, sometimes...
Miele C1 would be a good choice. It's the cheapest canister they offer, but straight suction is all you really need with hardwood floors. I would add the parquet twister, and possibly a turbo nozzle (STB-205) for the rugs, depending on the type.
Miele Classic C1
Miele STB 205-3 Turbo Plus Power Nozzle Attachment
Miele Parquett Twister SBB 300-3
Oh, you're funny! Even the special robust nozzles (i have this one https://www.amazon.com/Miele-205-3-Turbo-Nozzle-Attachment/dp/B000AMEKHW) have a hard time coping with all the hair that my ONE golden retriever sheds. There's no hope that a roomba would survive a day.
I'd recommend going with the Enhanced Cleaning Module. Here's a link:
Roomba 500 600 700 Series Enhanced Brush Assembly https://www.amazon.com/dp/B008Z9A3YG/ref=cm_sw_r_cp_apa_6.-GybKQSD6Z6
I replaced my 530s stock assembly with this one and it got much quieter. Supposedly it picks up more dirt too.
The STB101 comes with the usa version.
I use this but follow it up with a lint free cloth.
Endust for Electronics LCD and Plasma Pop Up Wipes 70 CT - 11506 https://www.amazon.com/dp/B002SBB0SU
I use this to clean keyboards and what not. Although I've never really needed to clean my laptop's keyboard.
Micro Vacuum Attachment Kit - 7 Piece https://www.amazon.com/dp/B000BSJCLY
Theres this one on Amazon that has Prime Shipping, I use this one for the really hard to get areas, just tape the breather holes up if you you need maximum suction:
http://www.amazon.com/gp/product/B000BSJCLY?psc=1&redirect=true&ref_=oh_aui_detailpage_o07_s00
This is also a highly recommended kit here I've seen lately:
http://www.amazon.com/gp/product/B001FS4TWQ?keywords=rigid%20vacuum%20kit&qid=1452815952&ref_=sr_1_2&sr=8-2
https://www.amazon.ca/gp/aw/d/B000BSJCLY/
I'm thinking something like this may work together with your regular vacuum cleaner. Much cheaper as well:
http://www.amazon.com/gp/product/B000BSJCLY?ref_=sr_1_cc_2&s=aps&qid=1407791647
Or buy a micro vaccum kit for 8 friggin dollars and be able to use it on the car and many other locations.
C'mon people, use the right tools for the job.
https://www.amazon.com/dp/B07KYNYVTJ/ref=cm_sw_r_sms_c_api_i_ywuTCbEH0H8J1
Here’s the amazon link!
You can push the seat up all the way and then thread the vacuum through the back of the seat, or you can get a flexible crevice tool like this: https://amzn.com/B0017PHQ6S
which is fantastic
Just bought a V8 for $350 and it doesn't even come with a simple plastic hardwood floor tool. WTF is that about. I'm looking at these two things...
I-clean Dyson Universal Adapter Converter for Dyson V8 / V7/V10 Cord-Free Vacuum Cleaners, Replacement Dyson Vacuum Cleaner Attachments/ Parts With A Free Cleaning Brush https://www.amazon.com/dp/B0779ZKP9W/ref=cm_sw_r_cp_apa_hsPUAb3NN9V4X
Qualtex Dyson Hardwood Floor Attachment Articulating Vacuum Cleaner Hard Floor Tool 920018-04 https://www.amazon.com/dp/B075SL18PS/ref=cm_sw_r_cp_apa_LsPUAb56VC159
I have a Miele vacuum with a special attachment for hardwood floors. It has a double pivot, and it works like a Swiffer where it glides over the floor at any angle (hard to describe if you haven't used one). It can go completely flat, so it's good for reaching under things.
I can easily vacuum all the way under my bed from one side. It also works under furniture, as long as it's high enough (a few inches). It fits all the way under my couch.
Here's a link to the attachment. I think you could probably use it with any canister vacuum with the right adapter and maybe some duct tape. I think Miele uses a different hose diameter than "normal" vacuums, but it's not far off.
https://www.amazon.com/Miele-Parquett-Twister-SBB-300-3/dp/B001F9Y9FC
There's this set of adapters available.
Personally I would go with one of the electric motorized tools that's available.
https://www.amazon.com/dp/B07952HVDW/?cv_ct_id=amzn1.idea.36CRAHW8FFOX1&cv_ct_pg=storefront&cv_ct_wn=aip-storefront&ref=exp_cov_performancereviews_dp_vv_mw
I guess it would be the Penetrating Catalyst. Down in the corner of the front it will have "Part No. 16 PB" http://www.amazon.com/Blaster-16-PB-Penetrating-Catalyst-oz/dp/B000I2079E. This stuff has worked wonders on my Clipper and it didn't take much. I was told and highly recommend that you should do this outside in a place where is plenty of ventilation. I carefully removed all the screws from the covers and replaced them in the chassis so I wouldn't get mixed up later (I tend to lose things). Following mrtopcons warning I wrapped the platen several times with aluminum foil as a mask. I placed a pair of old jeans on the floor of my garage to soak the oily runoff. I worked near the door. I sprayed and worked each type bar free, being careful to protect the platen. After I freed all the bars I let it sit 'til evening and carefully blew out any excess penetrant with air and then wiped off the rest. I let it air out for a few days on my patio table in the morning and back into the garage at night (also to double check the bars). I never had to respray it after the first day. After about 4 days of airing out I brought it inside, reassembled it and now I love my "new" Smith-Corona! This product is fantastic. I just got a '40 Royal KMM last week whose bars were completely immobilized by years of rust (dog hair and God knows what else). I vacuumed it out http://www.amazon.com/gp/product/B000BSJCLY/ref=oh_details_o04_s00_i00?ie=UTF8&psc=1 and took it outside to the garage. Within 15 minutes of spraying and patiently working each key (respraying when necessary) I got all the type bars COMPLETELY freed up. I was amazed. Good luck and let me know how it goes!
Other than like a soft bumper you've covered everything I know. Apparently you can change out the bins for some of the older models to the aerovac ones and there's an enhanced brush assembly that seems to have some decent reviews, but I haven't tried either. They're also a little pricey.
Very cool.
Even better, you can buy just the attachments.
Added to my cart.
http://www.amazon.com/Micro-Vacuum-Attachment-Kit-Piece/dp/B000BSJCLY/ref=pd_bxgy_hi_img_z
I use these attachments at home. It's cheaper than the canned air and works like a charm.
In your situation, as much as you prefer uprights, I would buy a canister. Why? Because you are a apartment dweller, & you have both hard floors & carpets to clean. Uprights can do both, but not as good as a canister with a horsehair hard floor brush. A canister would also be better for a apartment dweller because you can get under low spaces like beds & coffee tables easier, get into tight spaces, & if you move into a apartment later that has all hardwood floors & area rugs & small scatter rugs, you can still use your canister - but an upright? Nope. Most won't do small scatter rugs as well, & don't pick up as well on hard floors as a canister does. Also, if you plan on using the hose a lot with the attachments for furniture or above floor cleaning, the hoses on canister vacuums are MUCH BETTER & nicer to work with than the stretch hoses on upright vacuums.
In your price range, you could look into getting a used or refurbished Aerus Electrolux or TriStar CXL canister from a local vac shop or Ebay. They are both quality brands, bags & supplies are reasonably priced, & they have decent cleaning performance & reliability. You could also look into a used Miele canister with the SEB228 or SEB236 as well, especially if dust emissions is a concern. You can get generic HEPA filters & generic bags for them at reasonable prices, & although some people here & vac shops don't recommend using generic bags in them, I have not had a issue with the generic bags as long as you use them with care. If you insist it must be new, though, there are a couple other options. The Riccar Prima canister can be found for slightly out of your price range, & is a high quality bagged powerhead canister with HEPA filter & metal brushroll. You could also look at the Bissell Powergroom canister, that is in your price range & is bagless if you prefer that. https://www.amazon.com/Bissell-Powergroom-Multicyclonic-Bagless-Canister/dp/B01AAYGAFY/ref=sr_1_25?keywords=canister+vacuum&qid=1562192705&s=gateway&sr=8-25
If you look at uprights, make sure it has some way of shutting the brushroll off, whether it be by pushing a pedal that shifts the belt & the brushroll stops turning or a switch that shuts off a brushroll motor in the powerhead. The bagged Hoover Windtunnel suggested below would be a good pick. Anything from the T Series line would be a good choice. If you prefer, they also make bagless models. The Miele Dynamic U1 uprights I would not recommend. Miele's canisters are good, but their uprights are heavy & bulky, poorly designed & they have had several issues with them in the past, particularly with the quality of the onboard stretch hose. Bad enough that The Wirecutter dropped the Miele uprights from their list of recommended models. From Sebo's lineup, I would only recommend the Sebo Felix upright for your situation. Their uprights are reliable & well made, but also big & bulky. The Felix, however, has a brush on/off switch, swivel steering, the ability to convert to a handheld canister (albeit a bulky one), & the powerhead can be swapped for a hard floor brush to turn it into a full-sized upright stick vacuum. For a apartment dweller, that would be ideal in your situation, since you presently have 1/2 hard floor / 1/2 carpet, plus if you move to a place with all hard floors & area rugs & small scatter rugs, this is one upright you can still get use out of in that environment. The Fuller Brush recommendation is also good too, & like the others they have a HEPA Cloth bag & HEPA filter, but they are made in China. In your price range, for slightly more money, I would go to a vac shop & look at the Riccar Vibrance/Simplicity Symmetry uprights. Those are American made instead & slightly higher quality. For the price they want for that Fuller Brush upright, you could get a Panasonic upright from Amazon, with similar features, for 1/2 the price, with comparable quality. I would also take a look at the Cirrus uprights, they are another high quality upright comparable to Riccar/Simplicity & with similar features.
If you go for the Hoover Windtunnel or Fuller Brush, Riccar/Simplicity, Cirrus or Panasonic uprights, there is a hose kit available for them that gives you a super long hose, wands, crevice/dusting/upholstery tools & floor brush that you might also like to use as well for hard floors, as well as for above floor cleaning if you don't like a upright's stretch hose. As for cleaning pet hair, if you are talking about cleaning it off furniture, whatever you do don't get one of those turbo brushes! Yes, they do remove & clean the pet hair off the furniture, but the hair wraps around the brushroll & you spend just as much time cutting the pet hair off as you do vacuuming. What I have found really works well is if you buy a upholstery tool with red felt velour strips. These 2 upholstery tools from Shark & Miele are just examples, there are plenty you can find & choose from. Bissell & Hoover have also made pet hair tools in the past that have rubber blades & bristles that work well too. Also note that if you find a attachment that isn't 1 1/4"/32mm, & you want to use it with a vacuum that does use 32mm attachments, you can find all sorts of adapters to make tools fit different vacuums.
https://www.amazon.com/Maresh-Products-Attachment-Accessories-Simplicity/dp/B07HQJ6TRM/ref=sxbs_sxwds-stvp?keywords=vacuum+hose+kit&pd_rd_i=B07HQJ6TRM&pd_rd_r=cda8a449-8a14-462a-816e-765f01b65d9f&pd_rd_w=Q4NcM&pd_rd_wg=1uwY8&pf_rd_p=a6d018ad-f20b-46c9-8920-433972c7d9b7&pf_rd_r=XMCG7GHMWDC0VW4W5SDJ&qid=1562209066&s=gateway
https://www.amazon.com/Enbizio-Replacement-Parts-Rocket-Upholstery/dp/B07D5KJ1FT/ref=sr_1_90?crid=1MDHV4VVFBNNT&keywords=pet%2Bhair%2Bupholstery%2Bbrush&qid=1562210431&s=gateway&sprefix=pet%2Bhair%2Buphol%2Caps%2C167&sr=8-90&th=1
https://www.amazon.com/Miele-SPD-Wide-Upholstery-Tool/dp/B002QKMU4G/ref=sr_1_2?crid=16MJEV3M1DEW5&keywords=miele+upholstery+attachment&qid=1562210977&s=gateway&sprefix=miele+upholstery+%2Caps%2C171&sr=8-2
Would a flexible crevice attachment work for you? amazon
Hey man. Thanks so much for doing all these AMAs. I have enjoyed reading about them and learning about buying quality whenever I can.
I just moved into an apartment recently with 75% carpet and 25% tile/linoleum. Based on your other responses, I feel that something like a Miele S6270 would work great but do I need to buy a brush attachement (like this) to go along with it as well?