Reddit reviews UGREEN 3.5mm 1/8" TRS to Dual 6.35mm 1/4" TS Mono Stereo Y-Cable Splitter Cord Compatible for iPhone, iPod, Computer Sound Cards, CD Players, Multimedia Speakers and Home Stereo Systems 6FT

I am happy to help! I am not sure if the Yamaha TG77 has a USB interface like the Digitone does. If it doesn't, and you are interested in using your Yamaha TG77 with an oscilloscope (I highly advise you to) you will need an audio interface in order to get your sound from the device into your computer. Likewise, you can use a stereo to mono cable to hook in through your mic port. This is the cheaper option. (https://www.amazon.com/gp/product/B00ZKM3S4S/ref=ox_sc_saved_title_2?smid=AKXVBT49GGF3B&psc=1) But be warned, depending on how dirty your mic port is on your computer, the signal will not be a clean one. The best way to do it is through an audio interface, but if that is just not in the budget, you can always connect through your mic port.

Getting a set of T0s my self. :-)
Amazing little speakers and a sub out.

You need one of these and connect to the T0's analog input to the 6i6's line output.

I wonder if has something to do with mono vs. stereo - maybe you need to use an 1/8” to stereo 1/4” cable? This is how I record mine.

UGREEN 3.5mm 1/8" TRS to Dual 6.35mm 1/4" TS Mono Stereo Y-Cable Splitter Cord Compatible for iPhone, iPod, Computer Sound Cards, CD Players, Multimedia Speakers and Home Stereo Systems 6FT https://www.amazon.com/dp/B00ZKM3S4S/ref=cm_sw_r_cp_api_i_ZzMwCbVPC6V9C

Out of curiosity, what happens if you turn up the drum group (hold mixer button at the top and turn green dial)?

You use a 3.5mm stereo to 2 x 6.3mm mono.


Like this: https://www.amazon.com/UGREEN-Splitter-Computer-Multimedia-Speakers/dp/B00ZKM3S4S


(or other similar cables)

When the mic is unplugged I still get the same hum. My cables. Is there something better I could get?

This one will, but you can also get something like this that breaks it out into left and right mono 1/4 plugs

If you have an audio interface with 2 spare line inputs and direct monitoring capabilities, you can run a 1/8" to 1/4" T-cable from your TV/monitor's headphone jack to the interface and route the audio signal straight to your headphones. The interface that I use to accomplish this is a Focusrite Scarlett 18i8, but I believe the cheaper 6i6 model would work as well. While I wouldn't necessarily recommend buying an audio interface solely for this purpose, it provides a very convenient way for me to hear my consoles and PC at the same time while also recording from my microphone.

Here's what I currently have:


2 JBL 308P MkII - Powered 8" Two-Way Studio Monitors
https://www.amazon.com/JBL-Professional-Monitor-Speaker-308PMKII/dp/B077NHM2K6/


1 UGREEN 3.5mm 1/8" TRS to Dual 6.35mm 1/4" TS Mono Stereo Y-Cable Splitter Cord
https://www.amazon.com/gp/product/B00ZKM3S4S/


1 Mpow Ground Loop Noise Isolator for Car Audio/Home Stereo System with 3.5mm Audio Cable

https://www.amazon.com/gp/product/B019393MV2/


1 Google Chromecast Audio (Black) 

https://www.google.com/chromecast/audio/explore/

​

​

The red dots symbolize want I do not have yet. I'm working on eventually getting:

1 JBL LSR310S 10" Powered Studio Subwoofer

https://www.amazon.com/JBL-LSR310S-Powered-Studio-Subwoofer/dp/B00I08RT3U/

1 Focusrite Scarlett 2i2 Second Generation (2nd Gen) 2-in, 2-out USB Audio Interface

https://www.amazon.com/Focusrite-Scarlett-2i2-Generation-Interface/dp/B01H4W34WW/




​

Note: I have all that I need right now, but know that I may eventually buy a subwoofer for my studio monitors, which would make the setup more complicated. I only need help with adding the subwoofer. How will I do it? Will I need more cords and another ground loop isolator? Do I need an audio interface to add a subwoofer? How will I connect my 2 studio monitors and future subwoofer to my Chromecast Audio, my future audio interface, and a ground loop isolator?

I'm trying to figure out how I can pair this with my computer. I wanted to get a dac/amp combo to power this thing but I'm unsure about what connections will work. I was looking into this thing but wasn't sure how it'd connect to the speakers. Could I use something like this?

Here's what you're looking for on the U.S. Amazon web site. It's available in 3, 6, 10 & 15-foot lengths.

Hopefully, you can use the information on this page to find it on another country's Amazon site.

This appears to be the same product on the UK site.

This appears to be the same product on the French site.

This appears to be the same product on the German site.

OK, I'm done.

No reason an RCA to 1/8 converter wouldn't work that I can think of. Now for when it comes to 1/4 to 1/8, I use this and this

> mic goes to channel 1 speaker goes to phones. The speaker goes to phones is what is throwing me off, should it not be the headphones (a40) that goes into phones through the TRRS adapter you suggested?

Yes that's exactly what I mean. The TRRS adapter would be something like this one. The headset goes in the base of the 'Y', and that splits the headset out to two 3.5mm ports- one is 'mic' (which connects the headset microphone to channel 1), the other is 'speaker' which connects the headset speakers to the Phones output. You'll want some 3.5mm to 1/4" phono adapters to plug into the board's 1/4" connectors.

Consoles are a whole separate issue. I can't speak for PS4 as I only have an Xbox.

What you'll need to do is use the 3.5mm TRRS headset port on the bottom of your controller. If you have an older controller without that port, MS makes a plug-in adapter which gives you the 3.5mm port. You plug into that a TRRS Splitter (note this is similar to what you used for the headset, but the genders are reversed- the base of the 'Y' is male, and it goes into the device).
From there, we just reuse the connectors that go to the computer. The cable that connects the computer's speaker out to ch5/6 gets reused to plug into the Xbox TRRS adapter speaker out, and the cable that connects the board's aux send to the computer's mic input port goes to the Xbox TRRS mic port. If you want to keep both wired up you can, but you'll need a splitter for the Aux Send cable and another 3.5mm to dual mono 1/4 cable, this one will plug the Xbox's speaker out into Ch4/5 on the mixer.

BTW if you need a stereo 3.5mm to dual 1/4" mono cable, here's one. The white one is left, red one is right channel.

If you want to plug in Xbox, AND PS4, AND PC at the same time without swapping cables you will need a bigger mixer. I suggest check with me before you order one.

-----

You say the sound playing on the phones is 'off', do you mean it sounds bad or it doesn't play? I'm guessing maybe your TRRS adapter has the wrong genders on it and thus you aren't splitting things right...

You could also dump the A40s and go with a headset that has dual stereo minijacks natively like this one for $15. If you got that, you'd just get two 3.5mm to 1/4" phono adapters, use them to plug the green (speaker) plug into the Phones port and the red (mic) plug into Channel 1.

Looks like they are electronically balanced. When using a 3 conductor 1/4 they are balanced. I guess with one of these 2 conductor they are unbalanced.

Do you have a pair of headphones terminated in 1/4"? If so you could try monitoring the signal before it reaches the computer.


My first recommendation, if you haven't already tried, would be to unplug the USB and plug it back in.


My second recommendation would be to change over to analog. You'll need a cable similar to this one. It would plug into the output on the back of the mixer, and the light blue port on your PC. If your PC doesn't have that port you can use the microphone port.

+1 LR split cable is the only way.

UGREEN 3.5mm 1/8" TRS to Dual 6.35mm 1/4" TS Mono Stereo Y-Cable Splitter Cord Compatible for iPhone, iPod, Computer Sound Cards, CD Players, Multimedia Speakers and Home Stereo Systems 6FT https://www.amazon.com/dp/B00ZKM3S4S/ref=cm_sw_r_cp_apa_i_4eCIDb9H81XN1

Is the cable you're looking for? https://www.amazon.co.uk/UGREEN-Gold-Plated-Interface-Instrument-Amplifier/dp/B00ZKM3S4S/

To be more precise about what I've done:

From the audio out on the back of my PC, I plugged in the 1/8th inch inline ground loop isolator like what I linked above. Into the socket end of that I plugged in a 1/8 to 1/4 inch Y cable (or a splitter cable), then the ends of this Y cable plug straight into the JBL monitors. I have used something like this as the Y cable:

https://www.amazon.com/UGREEN-Splitter-Computer-Multimedia-Speakers/dp/B00ZKM3S4S/

Does that make the set up a bit more clear?

I think any speaker with an aux input should hook up via this cable:
https://www.amazon.com/dp/B00ZKM3S4S/ref=cm_sw_r_cp_apa_i_Rz2mDb4QX06B5

I always recommend JBL Bluetooth speakers due to how great my experiences have been with them, but almost any Bluetooth speaker available today will have an aux input.

Cool, thanks for the info. I think actually that this is the cable I need, I posted a question on amazon to see if it would work. I think the one you linked is to send a signal from say an iPod to your mixer. http://www.amazon.com/Y-Cable-Splitter-Computer-Multimedia-Speakers/dp/B00ZKM3S4S?ie=UTF8&ref_=cm_cd_al_qh_dp_t

Also, here's a version of the cable you need:

https://www.amazon.com/UGREEN-Splitter-Compatible-Computer-Multimedia/dp/B00ZKM3S4S

Depends on what you want.

This is for a PC right? So you're listening close up. That's a factor because the JBL's are designed for that.

JBL's with a $100 Dayton sub will sound great, be balanced, and provide more bass than any pair of bookshelf sized speakers on their own.

I'm guessing they mean because the JBL's are powered (they have amplifiers inside of them) then if you want to upgrade you just have to sell them and buy a new system. If you get an amplifier and speakers then you can upgrade the speakers or the amplifier separately. I'd add that the JBL's probably have more resale than Elac's or something like that if you consider upgrading a factor.


Don't worry about the XLR inputs if you don't need them - use these

https://www.amazon.com/UGREEN-Splitter-Computer-Multimedia-Speakers/dp/B00ZKM3S4S/ref=sr_1_3?keywords=stereo+breakout+cable&qid=1563309739&s=gateway&sr=8-3

They will plug in the little green audio output you can use for headphones.

For the subwoofer - does your PC have an orange 3.5mm audio output? If so hook that up to the subwoofer using these kinds of cables:

https://www.amazon.com/Cable-iXCC-Shielded-Gold-Plated-Stereo/dp/B019D048XC/ref=sr_1_5?keywords=3.5+to+rca&qid=1563309802&s=gateway&sr=8-5

The brands I'm linking don't matter, just the type of cable they are.