Best hex bolts according to redditors
We found 14 Reddit comments discussing the best hex bolts. We ranked the 10 resulting products by number of redditors who mentioned them. Here are the top 20.
We found 14 Reddit comments discussing the best hex bolts. We ranked the 10 resulting products by number of redditors who mentioned them. Here are the top 20.
1/4-20 1" long nylon bolts, $10 for 10.
I decided against digikey and went with a combo of Amazon and Ebay. Here's the parts I bought:
>Cheap trrs cable from amazon $5.69
>100 M2 screws from amazon $4.99
>50 M2 spacers from ebay for $4.49
>200 diodes from ebay $3.29
>70 gateron blue switches from switchtop.co for $22.75
I bought 2 pro micros from ebay and 1 from amazon just because I had amazon giftcards and might use the extra pro micro for a numpad.
>pro micro from amazon $8.70
>2 pro micro from ebay $10.98
That'd be zinc, yellow chromate. No cadmium to speak of. Example
>concrete wedge anchors
I like to use https://www.amazon.com/CONFAST-Lag-Shield-Anchor-Short/dp/B071K8R6CP/ or https://www.amazon.com/CONCRETE-LEAD-ANCHORS-10-Pcs/dp/B07JMKW5HR/ hope that helps.
>How to get audited in 10 easy steps
Well, the shittylifeprotip is because you don't get audited, but Fabory does. Dick move, so don't.
En kan je het ontvangende deel niet uitboren en er een metrische draad in trekken?
​
Amazon.co.uk?
https://www.amazon.co.uk/Stainless-Fastener-Appliance-Communication-Equipment/dp/B07R8DWZQ1/ref=sr_1_16?keywords=1%2F4+-+20+x+1+1%2F2&qid=1572297796&sr=8-16
Unfortunately, the setup is in a controlled lab (they started doing ITAR this year), so no pictures. The table is one of the vibration controlling ones, like this. There's no way to get to what's left of the bolt, since only the threads are left... so just the bottom section of a bolt like this We eventually decided it wasn't such a bad spot for the chamber, and just ran the experiments there.
There is the bolt https://www.amazon.com/dp/B00A31ZMZE/ref=cm_sw_r_cp_api_MsPyzbS084DD7
I got the parts to do my bolt mod through amazon.
Steel Machine Screw, Zinc Plated Finish, Pan Head, Phillips Drive, 8mm Length, M2-0.4 Metric Coarse Threads (Pack of 100) https://www.amazon.com/dp/B000NHXO1M/ref=cm_sw_r_cp_apip_C1psZpnNeYYeA
70 Pcs Silver Tone Metal M2 Hex Screw Nut Fastener Tool https://www.amazon.com/dp/B00BG8TFR4/ref=cm_sw_r_cp_apip_fGT2QZGYOP1P7
edit: correction: zinc plated:
https://www.amazon.com/Yellow-Chromate-External-Flanged-Non-Serrated-Threads/dp/B00DD3TAU2
Yeah, works great holding bikes together
It probably doesn't look quite as sturdy as it really is. I ordered longer versions of the original bolts that held the black handlebar brace in place, from here: https://www.amazon.com/gp/product/B00IAVIL66/ref=ppx_yo_dt_b_asin_title_o00_s00?ie=UTF8&psc=1
​
Then I simply installed them, and added 4 nuts to each bolt, along with washers at every end of the bolts, and tightened them very well with some blue Loctite. It doesn't wobble or bend or anything, and is quite solid. Feels like it's just part of the handlebar assembly. Those extra two inches make a big difference.
I bought this (it's a pack of 8, but you could get one at home depot or similar) and it works perfect. Just cut the head off and then to the correct length.