Reddit reviews 3M Auto Glass Urethane Windshield Adhesive, 08693, 10.5 fl oz Cartridge
We found 7 Reddit comments about 3M Auto Glass Urethane Windshield Adhesive, 08693, 10.5 fl oz Cartridge. Here are the top ones, ranked by their Reddit score.
Made for windshield bonding and glass attachmentExceeds OEM strengthsMedium viscosity
3M makes the best. Clean all the crap off the body and the window before putting new glue on it. Let the glue setup a little before installing the window or it will be a slippery mess.
https://www.amazon.com/3M-08693-Urethane-Windshield-Cartridge/dp/B000RW1XCK
Youtube will help you install and remove. Basically like /u/th7957 says you get a wire between the window frame and glass and cut the seal to get the glass out. Then you have the fun endeavor of cleaning the old gasket/sealant out.
Check out part suppliers that specialize in that vehicle for that window seal if it is available. It is more common to use window adhesive but I personally would rather use the correct gasket if it is an option. My guess is you will end up using the adhesive though.
Here..http://www.amazon.com/3M-08693-Urethane-Windshield-Cartridge/dp/B000RW1XCK/ref=sr_1_1?s=automotive&ie=UTF8&qid=1462847526&sr=1-1&keywords=auto+window+adhesive…. ya go
You need to get all of the old off first. And wipe it down with solvent[KEEP IT OFF THE PAINT!!!!!] Perhaps tape the area off first
[That stuff just so happens to be on sale (-$3) at Amazon right now for $11.99 shipped w Prime. FYI.](https://smile.amazon.com/dp/B000RW1XCK/ref=cm_sw_r_tw_dp_U_x_ZsvvDbQ3DB4W9 via @amazon)
A good glass shop?
OK, these windows are a royal PITA. You have to cut off the old rubber, remove the glass (carefully!) and clean the glass spotlessly clean, clean the opening (again, spotless) as well. You then need the proper sealant (possibly urethane?)
And you'd need the rubber weatherstripping. It has to be cut to size, and spliced (fun... basically using superglue).
I'm sure there are YouTube videos on it, basically a piece of cord to install the glass, and some sweat and work.
I'll use windshield caulking https://www.amazon.com/3M-08693-Urethane-Windshield-Cartridge/dp/B000RW1XCK
https://www.amazon.com/3M-08609-Window-Weld-Urethane-Cartridge/dp/B000FW61EW
They use polyurethane adhesive for windshields, so i'm guessing that would probably work fine for your mirror.
I don't think it comes in smaller containers than this for the 3m stuff though https://www.amazon.com/3M-08693-Urethane-Windshield-Cartridge/dp/B000RW1XCK/ref=sr_1_1?ie=UTF8&qid=1493075069&sr=8-1&keywords=3m+polyurethane