Reddit Reddit reviews StowAway Hitch Tightener, Anti-Rattle Stabilizer for 2 Inch and 1.25 Inch Hitches. Made in USA with a.

We found 9 Reddit comments about StowAway Hitch Tightener, Anti-Rattle Stabilizer for 2 Inch and 1.25 Inch Hitches. Made in USA with a.. Here are the top ones, ranked by their Reddit score.

Automotive
Towing Products & Winches
Towing Hitch Accessories
Towing Hitch Clips & Pins
Automotive Exterior Accessories
StowAway Hitch Tightener, Anti-Rattle Stabilizer for 2 Inch and 1.25 Inch Hitches. Made in USA with a.
SECURE: Hitch tightener prevents rattling, wobbling, rocking and hitch movement for cargo carriers, hitch racks, bike racks and trailer ball mount brands such as Thule, Rola, Yakima, Inno, Draw-Tite, Hidden Hitch, Reese and StowAwayINCLUDED: A heavy-duty 1/2 inch stainless steel U-bolt and 5/16" thick powder coated plate that will stand up to all weather conditions and loads. Easy installation by sliding the U-bolt over the stinger, sliding the tightener plate onto the U bolt, and tightening it in place with the included corrosion resistant hardware. Can be mounted from the bottom if hitch ground clearance is lowCOMPATIBILITY: Hitch tightener is compatible with all hitch brands, including Curt, Blue Ox, Hidden Hitch and U-Haul, among others, and hitch classes I, II, III, and IV (1, 2, 3 and 4), both 2” and 1.25” models, ideal for hitches on SUV’s, vans, trucks, RV’s, sedans and trailers.SUPERIOR DESIGN: Original anti-rattle hitch tightener design is proven to be one of the strongest and most effective on the marketWARRANTY: Manufactured in the USA with a lifetime warranty
Check price on Amazon

9 Reddit comments about StowAway Hitch Tightener, Anti-Rattle Stabilizer for 2 Inch and 1.25 Inch Hitches. Made in USA with a.:

u/mrasstits · 7 pointsr/Dirtbikes

I own the same carrier and ended up getting one of these to tighten things up a bit. Mine was a bit loose in the receiver and this did the trick. Welcome to the club and as my father used to say, "If you don't fall down you aren't going fast enough!"

https://www.amazon.ca/gp/product/B0001CMUV4/ref=ppx_yo_dt_b_asin_title_o01_s00?ie=UTF8&psc=1

u/bicball · 3 pointsr/teslamotors

As in shoving something in the gap around the square tubing? No. The ball mount did bounce around on my old 1 1/4" hitch, but I didn't feel/hear anything with this one (though with the trailer off, I can jiggle it around some). Maybe after a few trips it'll start wearing away, but I probably wouldn't do anything about it.

Looks like you can use something like this, but I like the ability to quickly connect/disconnect.

https://www.amazon.com/StowAway-Tightener-Anti-Rattle-Stabilizer-Hitches/dp/B0001CMUV4

u/iamprobablynotjohn · 3 pointsr/battlewagon

So the hitch that I found sits comfortably behind the number and actually affects the exit angle very little if at all. I'll also be getting a 1 1/4 to 2 inch adapter that is technically only meant for class II hitches, but for only holding a spare tire, it will be fine. It's also fine for holding a bike rack or something. I'll edit this comment when I'm at my computer and show you what I'm getting

EDIT:

  1. This is the hitch that I will be using. If you look at the pictures, it seems very discrete without much taken away from exit angle.

  2. This is the best one that I can find for your car. There aren't any pictures form reviews, but it sounds like in the comments that it is also discrete, although there's no guarantee. If that one doesn't work, something custom is probably your only option.

  3. This is the adapter that you can use. Just remember that as a general rule of thumb, your towing capacity is cut in half if you use one of these, just as a safety precaution. Towing with an adapter also depends on how strong the pin is that you're using to hold it into the base hitch.

  4. This is the tire holder that I am probably going to get. It seems a little short, but I measured on my car and it should be alright. If it is way too short, you can get a hitch riser like this

  5. THIS is the tire carrier that I want, because it is very very strong and the cheaper one folds to the side, which is really nice. I don't know if I'll be able to afford it, though, so I'll see
    If all this metal that's bolted to your car is rattling around way too much because of the couple millimeters of play in the hitches, pick yourself up a couple of these and it's problem solved.

    Hope this helps! If you want to know anything else, let me know


    Edit 2: formatting
u/daxdm302 · 3 pointsr/subaru

A hitch stabilizer will help keep the hitch basket from wobbling as much as normal.

https://www.amazon.com/StowAway-Tightener-Anti-Rattle-Stabilizer-Hitches/dp/B0001CMUV4

u/boundingalong · 2 pointsr/GoRVing

I have two of these i installed to prevent bouncing and such. One on the car bike rack and one on the hitch on the rv the car is attatched to. Not sure about the one on the rv doing much but i am sure the one the car for the bike rack reduced the amount of moving around the bike rack does. https://www.amazon.com/gp/product/B0001CMUV4/ref=oh_aui_detailpage_o07_s00?ie=UTF8&psc=1

u/kstache · 2 pointsr/Dualsport

If you have some slop between the hitch rack and receiver, you can use a "hitch tightener" or "hitch anti-sway clamp" to get rid of it.

I think this is the one I use with my hitch rack:

https://www.amazon.com/StowAway-Tightener-Anti-Rattle-Stabilizer-Hitches/dp/B0001CMUV4

It's worked well with my XR650L, which is close to 350 lbf with a full tank of gas. I can just about stand on one edge of the rack without any twist between the rack and receiver. It eliminated a lot of bounce and sway of the rack with respect to my SUV.

u/1LX50 · 1 pointr/XVcrosstrek

Can't fix it being heavy, but you can use this to address the wobble: https://www.amazon.com/dp/B0001CMUV4/?coliid=I27GJD1GE71WLC&colid=3IEN4PCTO7GYG&psc=0

u/Helen_A_Handbasket · 1 pointr/GoRVing

Get a hitch tightener. It will alleviate much of the "normal" noises a hitch can make. But yes, like everyone else says, make sure your hitch etc is correct.

https://www.amazon.com/StowAway-Cargo-Carriers-20-6-Tightener/dp/B0001CMUV4

u/climbingrocks · 1 pointr/dr650

You might want to look into a hitch tightener or other anti-rattle device.

http://www.amazon.com/StowAway-Cargo-Carriers-20-6-Tightener/dp/B0001CMUV4/ref=sr_1_1?s=automotive&ie=UTF8&qid=1465239011&sr=1-1&keywords=hitch+tightener