Best flexible industrial magnets according to redditors

And that is why I put mine on magnets.

Flexible Magnet Sheet With Adhesive, 0.030" Thick, 12" Wide, 24" Length (1 sheet rolled inside tube) https://www.amazon.com/dp/B005HY990G?ref=yo_pop_ma_swf

Try magnetic wall sheets...one sec, let me find a link

Wall26 24"x 60" (2 by 5 feet) .30mil Super Strong Flexible Magnet Material https://www.amazon.com/dp/B01GQ048EQ/ref=cm_sw_r_cp_apa_OQQ-BbXWGZVQ0

well i first wanna thank TheMagistrate he made this post about this a month ago. https://www.reddit.com/r/Steelbooks/comments/9qjdb0/about_13rd_of_my_collection_running_out_of_wall/

ive been using https://www.amazon.com/gp/product/B01GQ048EQ/

using this i have been cutting it in 5 x 4.75 squares and you can get 55 out of each roll that way. i also feel like you could get away with making them smaller. I however personally feel that they are going to be more secure the way i did it.

https://www.amazon.com/gp/product/B071YVJ1XW/ and i use about 5 of these to mount them on the wall.

It's super easy!

Just take two of these: https://www.amazon.com/gp/product/B071YVJ1XW/

Cut a 3"x3" square out of this: https://www.amazon.com/gp/product/B01GQ048EQ/

Stick the adhesive strips to the magnetic square, then to the wall!

​

Measuring out spacing on the wall was the hardest part. I'm able to mount almost 100 steelbooks for about $35.

I'm more likely to leave most anything lying around versus putting it back in a box, especially if it's a high-quantity cheap thing like bobby pins. As a result they're just everywhere. If all I had to do was hold up the 5 I used that day to a magnetic strip on the wall/inside of the medicine cabinet that I have to open anyway, I'd be more likely to "put them away".

For some reason I can't be bothered to open/close an altoids tin for them and it looks more untidy (for me) to just leave one open with things spilling out of it. There are all-acrylic transparent cosmetics drawers available but unless I'm at Goodwill they cost more than I'm willing to spend.

If you're into sticking just about everything onto magnetic surfaces (spices on the inside of cupboard doors, memos + magnets on a strip by the front door, upright office inbox things on the side of the fridge next to the sink for dish brushes, medicine reminder boxes on the wall next to the bed) then it's more economical to buy a pack/long strip of them for $15 like this versus some specialty things like results for "cosmetics drawer organizer".

You can use things like tackle boxes or probably come up with all kinds of alternatives but if we assume that I'm not very clever or creative or punctual or organized then this is a neat-but-not-life-changing tip.

Edit: Also I know I gave you amazon links but honestly I'm in a weird living situation where my elderly Chinese landlady gets my packages delivered to her front door since UPS/USPS can't or won't deliver to my backyard apartment and I feel really rude/intrusive having her need to be a middleman for dumb little packages, like $4 adhesive cable clips or heavy things like a vertical bike rack, so I don't like to order things that frequently despite having prime. So while some of the organizers are $12 on amazon, they're often marked up 160% at physical stores that might not price-match. ¯\_(ツ)_/¯

This is exactly what I bought. If you happen to be near Burbank I have a ton of extra I would like to give away. Edit: I adhered the Carpool stickers and the backing paper to the sticky side of the magnet sheet. This way, if I have to I can unstick the carpool sticker and place them on the car though I really hope it doesn’t come to that.

I did this

http://www.overclock.net/t/1515948/official-thermaltake-core-v1-owners-club/20#post_22968787

Get a magnet sheet. You can find it stationery shops, it was €5 for 5 here, standard A4 format.

Cut it out (measure the are you want to cover ofc) and use some regular stockings/pantyhose as the filter. Tape it to the magnet sheet... and that's it.

Alternatively you can buy magnetic tape at DIY store. Like this one

https://www.amazon.com/XFasten-Flexible-Magnetic-1-Inch-10-Foot/dp/B01HR3J3CI

It's like regular tape but the non-sticky side is magnet. You can make a square out from the tape and put the stockings on it and then cover it (the tape side) with some regular tape. Or with another layer of magnetic tape. Then you have magnet on both side tho it doesn't really matter imo.

Master Magnetics Magnet Sheet | Flexible Magnet Sheet with Adhesive, 12" Wide, 24" Long | 8504 https://www.amazon.com/dp/B005HY990G/ref=cm_sw_r_cp_apa_X36YBbA44AEQX

I've had mixed results with the adhesives on those. I would suggest supplementing with a bit of super glue/epoxy.

Also, depending on what OP is making it might be a good idea to go for bigger magnet sheets that can be cut down to size. It's bit more budget conscious and you can make odd shapes if necessary.

http://www.amazon.com/Flexible-Magnet-Adhesive-Length-rolled/dp/B005HY990G/ref=sr_1_1?s=arts-crafts&ie=UTF8&qid=1404232861&sr=1-1&keywords=magnet+sheet

Stick this to pieces of tape magnet and you have a non-permanent solution.

Maybe stuff like this: Magnetic Tape [Extra Strong Premium Grade] Magnet Strips with New Super Strong Adhesive Backing for Walls, Boards, Crafts, Storage, DIY, Home, Garage and Displays [Heavy Duty Thicker Roll] 32mm Wide https://www.amazon.com/dp/B073519752/ref=cm_sw_r_cp_api_i_w5iYDbX1P17WJ

https://www.amazon.com/XFasten-Flexible-Magnetic-1-Inch-10-Foot/dp/B01HR3J3CI/ref=zg_bs_1265131011_1?_encoding=UTF8&psc=1&refRID=F83PZ81PXYJYRYWETFVR

I put 4 squares in each corner, it holds pretty well. Haven't had one fall yet.

Hi frankie! I made my DIY top dust filter for the SM550 just the day before last :)
So the top measurement of the grid are, if I remember correctly: 7,5cm x 24.5cm (I can confirm it later in the day as soon as I get home).
I bought some 140x140mm mesh dust filters and a magnetic strip, cut the mesh and assembled:


https://www.amazon.it/gp/product/B01IBA1D0Q/
https://www.amazon.it/gp/product/B01IVJQQ7W/
(sorry for the .it links, I live in Italy eheh)


Being 24.5 cm in length I had to merge 2 140x140 filters together: after building the outer layer I cut a small piece of magnetic strip in the middle (in order to make it thinner) and used that both to hold the 2 pieces in place and to anchor the filter to the metal part of the top.
As I didn't want to obstruct most of the grid, I made the filter so the magnetic strips on the sides are half on the top grid and half on the non-magnetic top cover of the case: like this there's a decent magnetic force from the half of the strip touching the grid and the mini-strip in the middle fix it definitely.


It's not SUPER sticky to it, but enough to be in place and not let the dust pass, I'll post a pic later :)

Flexible Magnet Dots with... https://www.amazon.com/dp/B072J32NP3?ref=yo_pop_ma_swf

These are the ones I got 🙂

https://www.amazon.com/dp/B01GQ048EQ/ref=cm_sw_r_cp_apa_OQQ-BbXWGZVQ0

Here is a 24" by 5ft roll for $27.

https://www.amazon.com/Magnum-Magnetics-Strong-Flexible-Material/dp/B00HPAB2DW/ref=sr_1_6?keywords=MAGNUM+MAGNETICS&qid=1566583100&s=gateway&sr=8-6

Rest can can be done with vinyl paint

I have no knowledge of which of these are "the good stuff" but this will give you an idea of what i mean.

http://www.magnetking.com/?gclid=CjwKEAiA9s_BBRCL3ZKWsfblgS8SJACbST7DezASoRf5KVFSLxe_qBKx3dxZC7z5JYvchDqVxMUJgxoC7-zw_wcB#regularmagnet

https://www.amazon.com/Flexible-Magnet-Adhesive-Length-rolled/dp/B005HY990G

https://www.amazon.com/Flexible-Magnets-30mil-Strong-Material/dp/B016OR9SCS/

https://www.amazon.com/Flexible-Magnetic-Sheet-White-Length/dp/B005HY9KDM

Here's an enormous one, that you should be able to cut down. But it's always most important to figure out what works best for you. Good luck!

Wall26 24"x 60" (2 by 5 feet) .30mil Super Strong Flexible Magnet Material https://www.amazon.com/dp/B01GQ048EQ/ref=cm_sw_r_cp_apa_i_-PE7CbS45996S

If you want a more elegant solution, and have a steel case, use this: https://www.amazon.com/XFasten-Flexible-Strong-Magnetic-10-Foot/dp/B01HR3J3CI/

Add a line of magnetic strip and a little lip in front to hide it? You can get it as thin as 1/32". https://www.amazon.ca/Master-Magnetics-Flexible-Coating-32-Inch/dp/B00BNDUVW0/ref=sr_1_6?ie=UTF8&qid=1506528874&sr=8-6&keywords=magnetic+strip

Here is the mobile version of your link