Best powersports grips according to redditors
We found 105 Reddit comments discussing the best powersports grips. We ranked the 36 resulting products by number of redditors who mentioned them. Here are the top 20.
We found 105 Reddit comments discussing the best powersports grips. We ranked the 36 resulting products by number of redditors who mentioned them. Here are the top 20.
$8.99
I bought these for the tape https://www.amazon.com/TALON-Grips-Material-Sheet-7-Inch/dp/B01FLQO5IU?keywords=mouse+grip+tape&qid=1540671229&sr=8-8&ref=sr_1_8
Talon grips, material is very rubbery and doesnt peel away easily when heated with a blow dryer.
throttle assist thingy:
https://www.amazon.com/Nuoxinus-Throttle-Motorcycle-Handlebar-Universal/dp/B016Q843CA/ref=sr_1_9?keywords=throttle+assist&qid=1557490632&s=gateway&sr=8-9
im a programer and over time i have spurts of carpal tunnel, so on long and short rides, it helps ease some pressure off my wrist using one of these things. you just rest the palm of your hand on it, adjust as needed.
your wrist isnt supposed to be bent 40-90 degrees straight up,
If that's all you want, you could get some rubber grip tape off Amazon. I use it for my pistol, but in theory it would keep it from marking your floor.
TALON Grips Rubber Material Sheet, 5" x 7", Black https://www.amazon.com/dp/B01FLQO5IU/ref=cm_sw_r_cp_api_i.76yb451QCS8
I don't know if that's what you're looking for, but it would probably get the job done. I love that stuff.
I took my lad for the first time at 6 with one of these and also got on of these
Get them on as soon as you feel they will be ok, personally I don't see riding as any more dangerous as taking the car bu then I'm one of those
better ridersthat hasn't ever dropped a bike in the 10+ years i have been riding.I actually have an Abyssus V2 that I took down to 68g by removing the 10g weight that is screwed on inside and replacing the rubber side grips (which weigh another 3-4g) with this material, which grips better and is far lighter.
Definitely worth doing.
These are what I have for 7/8ths:
https://www.amazon.com/PROGRIP-714BK-Black-125mm-Sport/dp/B000WO8MKY/ref=sr_1_1?keywords=PROGRIP+714BK+Black+125mm+Dual+Sport+Gel+Grip&qid=1570152055&s=automotive&sr=1-1
They're thicker than regular grips which for some reason helps out a lot with hand fatigue. Plus they're just really comfortable. I bought them November of last year and they're still like brand new
Also I've heard about those coils you put underneath your grips before, I'll look up some youtube reviews and see what kind of experience people have with those
That's a real weird decision for a phone in their "Active" line.
Go add some strips of TALON Grip to the sides. It's normally used for firearms to add additional traction for better purchase.
I actually use a strip of it on the side of my MNML case so that my fingers can get a good grip on the phone (I'm left handed, in case you're wondering why it's on that side).
https://www.amazon.com/TALON-998R-Grips-Rubber-Black-7-Inch/dp/B01FLQO5IU/
http://imgur.com/46WryiN
Adding Grip Puppies to heated grips will extend the life of the grips indefinitely. And it makes them much more comfortable.
Progrip 714, easily the best cheap upgrade you can get.
I've been running foot pegs similar to these for three years now.
I dislike the cheap LED lights for visibility. I mean....why bother having indicators at all if they're not visible? Each time I go looking for new indicators I'm like....meh the stock ones do their job just fine.
Try this: https://www.amazon.com/gp/product/B01FLQO5IU/ref=oh_aui_detailpage_o02_s00?ie=UTF8&psc=1
​
TALON Grips Material Sheet, 5 x 7-Inch -- Rubber Black
https://www.amazon.com/gp/product/B01FLQO5IU/ref=oh_aui_detailpage_o00_s00?ie=UTF8&psc=1
Talon gun tape. Amazon link here:https://www.amazon.com/TALON-Grips-Material-Sheet-7-Inch/dp/B071LJXKMP
God I hope this formats correctly - I am a neophyte.
Exhaust - http://www.ixilusa.com/ixil-l3xb-black-hyperlow-xl-full-exhaust-yamaha-mt-07-2014-2015/
Super deep and loud sound - videos online don't do it justice, its unbelievably loud when the baffles are out. Had to have the cat cut out of it. Be aware they have a cat in the V section before the end of the pipe.
Removed the snorkel covering the airbox - I was told its basically blocks airflow.
ECU Flash / Dyno by 2wheelDynoWorks - https://2wheeldynoworks.com/shop/ecu-flashing-service/15-17-yamaha-fz07-mail-in-ecu-flashing-service/
Nels himself worked on my bike - super stoked (shout out to Nate too) They have the best customer service.
Active Tune - https://2wheeldynoworks.com/shop/ecu-flashing-service/yamaha-activetune-afr-closed-loop-self-tuning-ecu-kit-2/
Tune as you go
Bike side harness - https://2wheeldynoworks.com/shop/ecu-flashing-service/ftlink-v1-1-6-pin-bike-side-harnesses/
For tuning later
Windscreen - https://www.revzilla.com/motorcycle/puig-touring-naked-new-generation-windscreen-yamaha-mt-07-2018
I got light smoke, I think it goes better with the bike and pushes wind over my shoulders even at 80+ mph
Protection - https://tstindustries.com/Womet-Tech-Total-Crash-Protection-Pack-for-Yamaha-FZ-07-MT-07-2015.html
Basically got everything from this except the bar ends
Bar Ends - https://motostarz.com/collections/mt-07-2018/products/rhinomoto-barends-mirror-mounts-for-yamaha-fz-mt-models
Super easy to replace mirrors etc with these - and they add protection
Throttle tube - https://www.amazon.com/gp/product/B005C59NO2/ref=oh_aui_detailpage_o01_s00?ie=UTF8&psc=1
90 to 60 degree conversion - its amazing for the price
Dash Screen Protector - https://www.amazon.com/gp/product/B078SMP4ND/ref=oh_aui_detailpage_o00_s00?ie=UTF8&psc=1
Mirror stem deletes - https://www.amazon.com/gp/product/B07BN8QGPV/ref=oh_aui_detailpage_o02_s00?ie=UTF8&psc=1
Current Mirrors - https://www.amazon.com/gp/product/B01N6GB7DZ/ref=oh_aui_detailpage_o02_s00?ie=UTF8&psc=1
Mirrors in photo - https://www.amazon.com/gp/product/B003RESHVU/ref=oh_aui_detailpage_o00_s00?ie=UTF8&psc=1
I like the CRG Mirrors but they get bumped and are hard to readjust - the cheap ebay/amazon mirrors work great
Headlight replacement - https://www.amazon.com/gp/product/B01H6NZ5QW/ref=oh_aui_detailpage_o01_s00?ie=UTF8&psc=1
Signal replacement LED bulbs - https://www.amazon.com/gp/product/B06XK4PL33/ref=oh_aui_detailpage_o01_s00?ie=UTF8&psc=1
Super bright replacements for stock bulbs - used the original housings, they plug right in
Running light LED replacements - https://www.amazon.com/gp/product/B00JRE38EA/ref=oh_aui_detailpage_o01_s01?ie=UTF8&psc=1
For inside the headlight housing
Tail Tidy - https://www.amazon.com/gp/product/B01BH5YGOM/ref=oh_aui_detailpage_o04_s00?ie=UTF8&psc=1
Flasher Relay for LEDs - https://www.amazon.com/gp/product/B00RM26LXO/ref=oh_aui_detailpage_o01_s00?ie=UTF8&psc=1
Levers - https://www.ebay.com/itm/CNC-Brake-Clutch-Yamaha-MT-07-FZ-07-2014-2018-Adjustable-Engrave-Long-Lever/123350737715?_trkparms=aid%3D555018%26algo%3DPL.SIM%26ao%3D1%26asc%3D20131003132420%26meid%3D17a37c1b2d204ffcba65903d19a97b4a%26pid%3D100005%26rk%3D4%26rkt%3D12%26sd%3D122997203335%26itm%3D123350737715&_trksid=p2047675.c100005.m1851
Passenger peg deletes - https://www.ebay.com/itm/for-YAMAHA-MT07-FZ07-Footrest-Cover-Passenger-Footpeg-Removal-Delete-Kit-2014/253869999740?hash=item3b1bd4c67c:g:3qEAAOSw0JVbm1FQ:rk:1:pf:0
I removed the passenger pegs, needed a bracket to hold the brake fluid reservoir - also cleaned up the pegs
Havent done the brakes yet - going to replace the lines etc with steel braid.
Also want to do a sprocket / chain swap for acceleration
I used a quadlock phone mount for a little bit - but took it off because I was playing with my phone too much.
I have been looking for the same thing. I have tried all of these cases and what I found is that TPU cases are not anti-slip. They are more slippery like you said. PU leather cases have some grip. I tried this one and found it fairly anti-slip. But I wasn't a fan of the way it looked.
As of right now, I'm going to get a simple TPU case and stick this on the back. It adds a ton of grip and adheres very good.
https://www.amazon.com/gp/product/B01FLQO5DU/ref=ppx_yo_dt_b_asin_title_o09_s00?ie=UTF8&psc=1
i used this grip tape off amazon for my GPW. Theres a rubbery version but i felt the granulated gave more grip. Its been on for about 8 months and hasnt peeled or needed to be reapplied at all
this vest: https://m.aliexpress.com/item/33027294325.html?pid=808_0000_0101&spm=a2g0n.search-amp.list.33027294325&aff_trace_key=b8142fb7bc97448b948ef8d1f0539182-1567089456401-02957-qtdR1i0&aff_platform=msite&m_page_id=8754amp-joBZ_7P6uI2I877vf9X-ng1573389924715
Or similar. Basically compare AliExpress ones with Amazon ones and read the reviews.
This battery pack: https://www.amazon.com/dp/B07RTGQYFC?ref=ppx_pop_mob_ap_share
Heated grip covers: https://www.amazon.com/dp/B00NYC7BH6/ref=cm_sw_r_cp_api_i_HCaYDbD7QPJ9R be sure to read the reviews as they are a little small. Still work for me, especially for the money. Make sure to get a relay and a fuse to wire them right.
Went to Cycle Gear and tried on gloves until I found I liked the Bilt ones. Got liners there too. The rest is somewhere on the Internet, shouldn’t be hard to find.
I just used grip puppies. If you don't mind not using leather.
https://www.amazon.com/dp/B00CP9ADD8/ref=cm_sw_r_other_apa_-eSUAbBDKBD5H
I just got my cart as well and haven't had a chance to use it. I added a phone mount, Bluetooth Speaker and grip.
Phone Mount - Amazon
Speaker - Amazon
Grip - Amazon
https://smile.amazon.com/gp/product/B01FLQO5IU/ref=ppx_yo_dt_b_asin_title_o01_s00?ie=UTF8&psc=1
Here's the one I use, it comes in a pretty big sheet and is easy to apply.
Heated grips doesn't have to be so expensive. I'll treat my CBR with these babies next year ;)
http://www.amazon.com/BikeMaster-Motorcycle-Heated-Grips-Controller/dp/B009Z1KQ2M/ref=sr_1_1?ie=UTF8&qid=1449600110&sr=8-1&keywords=heated+hand+grips+motorcycle
Get some grip puppies
https://www.amazon.com/Sportouring-Handlebar-Grip-Puppies-Grips/dp/B00CP9ADD8/ref=sr_1_1?ie=UTF8&qid=1501605757&sr=8-1&keywords=grip+puppy
Maybe look into heaver bar end weights too.
I usually take painkillers before, durying and after long rides.
Specs for grips that I've found online all claim the right side has a wider diameter. Examples:
"LEFT side is 7/8", RIGHT side is 1" for twist gas throttle"
https://www.amazon.com/handle-Grips-YAMAHA-FZ6R-FZ8-Red/dp/B00QF42CZ6
​
"22mm / 7/8" (LEFT), 25mm / 1" (RIGHT)"
https://www.ebay.com/itm/BLACK-MOTORCYCLE-7-8-HAND-GRIPS-HANDLE-BAR-GEL-FOR-YAMAHA-YZF-R6-HONDA-CBR-600/263818692819?fits=Model%3AYZF+R6%7CMake%3AYamaha&hash=item3d6cd1c8d3:g:0ekAAOSwLS5bRGuF
https://www.amazon.com/TALON-Grips-Material-Sheet-7-Inch/dp/B071LJXKMP
Those big webbing belts you can get with the handles on each side are a bit weird looking but probably great for kids like yours to hang onto comfortably without having his face smushed into your back.
​
Like this
For 77 dollars? Heck no. You could build yourself something more versatile for less. On amazon there is this set of resistance bands for 29 dollars that includes 4 other resistance bands plus additional accessories including an ankle cuff that you can use for the elbow cuff. You can buy a piece of PVC pipe cut it to about the size of your 6 iron put two of these grips, which cost $7, on the pvc using an adhesive. Find something similar and smaller than this and screw it into the pvc and you’ve just created exactly what they’re trying to sell you. All told you’ll probably spend about 40 bucks and you’ll get the added benefit of regular length resistance bands
I hope this helps you, I’m not knocking the product it’s just absurdly expensive for what you’re getting. There are many exercises you can do with the extra resistance bands with hands. Rotational exercises using the band can increase your core strength and hip strength.
To answer questions I'm sure I'll get, here are a list of things you can see that are not stock on the bike.
The restrictor plate has been removed from the airbox already, and I'm using a high-flow filter. The carbs are jetted to 135 main, 42 pilot, with 1 shim on each needle. This is also the recommended jetting for pods, from what I've read.
** edited to add links to everything that I could.
Gun Grip works great and is pretty cheap. https://www.amazon.com/dp/B01FLQO5IU/ref=cm_sw_r_cp_api_WhnVBbBFE90CY
If you don’t mind a rougher texture fingerboard / skateboard grip tape is awesome but can tear your hands up over time if you move your hand position a lot.
There is also a foam version for fingerboards “Tech Decks” that Ive been meaning to try. https://www.amazon.com/dp/B00AW3ZRF8/ref=cm_sw_r_cp_api_RknVBbC6P81AG
Pistol grip material
https://www.amazon.com/TALON-998R-Grips-Rubber-Black-7-Inch/dp/B01FLQO5IU/ref=sr_1_4?ie=UTF8&qid=1551087471&sr=8-4&keywords=pistol+grip+tape
> I just wish there was some sort of texturing
How about something like this? It's what I was planning to use on mine.
EDIT: Searching a bit more revealed this!
TALON 998R Grips Sheet (Rubber-Black, 5 x 7-Inch) https://www.amazon.com/dp/B01FLQO5IU/ref=cm_sw_r_cp_apa_j218Bb89PSZHC
http://forum.bodybuilding.com/showthread.php?t=146482473
I got these but have yet to put them on http://www.amazon.com/Sunlite-Road-Foam-Grip-piece/dp/B000AO5K42/
Buy this: https://www.amazon.com/dp/B01FLQO5IU/ref=cm_sw_r_cp_api_RQi.xb8EANA48
Cheap and awesome material.
Example: https://imgur.com/r/MouseReview/8khlVXk
I have these Bike Master ones, and love them:
https://www.amazon.com/Bikemaster-Heated-Grips-Switch-Am19012h/dp/B00NYBZ4CQ/ref=sr_1_2?s=automotive&ie=UTF8&qid=1524009529&sr=1-2&keywords=bikemaster+heated+grips
There's a cheaper model that just has a button to control them, the ones I've linked have a little illuminuated LCD display which not only shows the current setting (Off, 1 -> 5) but also the current voltage, which is great because you're always aware of whether your battery/alternator are up to snuff.
Highly recommend them!
IMO the best mods you should get after bash plate, fat bars and bark busters, and radiator guard are:
The R6 throttle tube (or equivalent). The stock throttle doesn't have enough throw to get WOT comfortably or quickly while standing.
http://advrider.com/index.php?threads/yamaha-wr250r-mega-thread.329337/page-3154#post-33425371
The throttle tube part #: 2C0-26240-00-00 is from the 2006 - 2015 Yamaha R6
Here is an amazon link: http://www.amazon.com/Yamaha-2C0262400000-Grip-Assembly/dp/B005C59NO2
And the RSC clutch. For improved modulation.
http://advrider.com/index.php?threads/yamaha-wr250r-mega-thread.329337/page-2979#post-31848139
After that would highly recommend Tubliss system. and IMS foot pegs. and IMS 3 gal gas tank. And at some point you gotta get the DRC tail light. And the Sandman case saver....
You have a lot of options here to spend your money. You will like all these mods I promise. But keep the motor and intake and exhaust stock. I have tried all the "free mods" none of them were very helpful, most of them just made it worse. And all of the expensive motor mods, although they did make it faster on the street, they made it suck much more off road, for me at least.
I'm a warm water cephalopod swimming in cold waters, so I went for heated grips and am a very happy squid.
Simple mod is an R6 throttle tube. https://www.amazon.com/Yamaha-5SL262400100-Grip-Assembly/dp/B005C5AMQ0
With some ingenuity you can go for a DIY fender eliminator. Looks real sharp. Guide: https://plus.google.com/photos/112703784529139043406/albums/6030360174284969649
Edit: Also forgot the TRE mod: http://www.svrider.com/tips/retard.htm
I've seen a lot of people use gun grip tape to pad up their mouse, something like that would probably help you out here.
TALON 998G Grips Sheet (Granulate-Black, 5 x 7-Inch) https://www.amazon.com/dp/B01FLQO5DU/ref=cm_sw_r_cp_apa_i_.CecBbXRV2BFJ
One thing that isn't explicitly mentioned here is the difference between reflected and projected headlights. Halogen lights are reflected and LED's are projected. I'll let you do your own research on this matter because there are a bunch of articles that will communicate the difference between them better than I can. While you can put a LED H4 bulb in a relective housing, you definitely should NOT do this. The beam pattern will be all wrong and blind everyone. This is not ok. You should only use a projected bulb with a projection housing, so if you want to go LED you should pony up for a full on kit. This is all under the assumption that your bike now has a reflective housing.
Also, your stator might be able to keep up with the power output with the heated grips attached. I recently purchased the bikemaster heated grips and threw them on my bench power supply. At full output they only used 30W of power and these bad larrys put out plenty of heat. I've only ever needed them at half power riding in ~40F temps. Good luck.
https://www.amazon.com/TALON-998R-Grips-Rubber-Black-7-Inch/dp/B01FLQO5IU/ref=sr_1_1?ie=UTF8&qid=1510877714&sr=8-1&keywords=rubber+talon+grip
get rubber for a softer feel or granulate for something a little more rough (you can sand it out with 120g sandpaper if it's too rough, just make sure you do this before you put it on).
I just got these, I really like them Bikemaster Heated Grips for 7/8in handlebars - One Size https://www.amazon.com/dp/B009Z1KQ2M/ref=cm_sw_r_cp_apa_4UzcAbH5S59NA
TALON 998R Grips Sheet (Rubber-Black, 5 x 7-Inch)
https://www.amazon.com/dp/B01FLQO5IU/ref=cm_sw_r_cp_apip_DhKSeXWYHgHXk
The 520 says its made for claw and the 530 for palm but I have a slight claw grip and I still liked the 530 better. If you do get it though, make sure to get something like this to put on the sides of the mouse: https://www.amazon.com/TALON-998R-Grips-Rubber-Black-7-Inch/dp/B01FLQO5IU/ref=sr_1_cc_1?s=aps&ie=UTF8&qid=1511975978&sr=1-1-catcorr&keywords=talon+grip
I bought it off amazon. But you can get just the tube as well. Or the motion pro for a slightly less aggressive effect. https://www.amazon.com/YAMAHA-2C0262400000-Yamaha-Grip-Assembly/dp/B005C59NO2/ref=mp_s_a_1_3?keywords=Yamaha+2C0262400000+Grip+Assembly&qid=1565977871&s=gateway&sr=8-3
Thanks, I was unaware as I have just recently seen those. This is what I usually use, https://www.amazon.com/TALON-998R-Grips-Rubber-Black-7-Inch/dp/B01FLQO5IU/ref=sr_1_3?keywords=talon+grips&qid=1565646549&s=gateway&sr=8-3
2010 Phantom here. I got pretty much everything on amazon, save for the seat and bags.
I just got done installing a Memphis Shades Batwing with lower deflectors, and a Ultimate seat with backrest on mine a couple weeks ago. The 6" recurve/spoiler windshield I ordered for the batwing is a bit to short for me (I'm 5'8"), which causes wind buffeting around my helmet. I'm still debating on going for a 9" spoiler or 11" standard. The seat, while being a bit more firm, is a lot more supportive than the stock one. I haven't had the chance to test out the backrest yet, but it seems like it will make longer trips much more comfortable/tolerable.
The Viking Bags I got for it should have been a bolt on affair, but they conflicted with the shock and seat so I brought the bike to a local shop to get them installed properly and the turn signals relocated. I should have ordered the shock cutout versions, but didn't check until after the return date, oh well, live and learn.
Some other universal things I installed myself were Grip Puppy comfort grips, motorcycle bar phone mount, bluetooth remote control with bar mount.
adding more grip? I added these to my grips, which are heated, and wearing, but no cause they be wearing, but because my bike vibrates the handlebars a lot. It will prolong your old grip, and they $12
Hasn’t happened to me yet, but I’m not planning on making it easy for assholes when it does happen. I keep one of these brake clamps on whenever I park.
Get some of this to use on it man. It would look much better than the wood grain
Getting the end caps off was kind of a pain because I couldn't just them to unscrew so I had to use a screwdriver and mallet to tap them loose.
I just made holes in the ends of the grips just big enough for the handlebars to fit. Otherwise you'll have to look for open ended grips like these.
To get the old grips off I just cut them with a utility knife (gently on the throttle side since the throttle controller is under the grip and it's plastic). Then I use hairspray to lubricate the new grips so they would slide on easily then when the hairspray dries it helps glue the new grips into place.
Also if you don't want to put bar end mirrors you might be able to just slip the new grips over the bar end caps, not sure though, depends on how much the grips can stretch.
Getting something like this: https://www.amazon.com/TALON-Grips-Material-Sheet-7-Inch/dp/B071LJXKMP
and trimming it to fit your mouse might be the best bet.
Progrips I think...
It's talon grip tape from
Amazon link : https://www.amazon.com/TALON-Grips-Material-Sheet-7-Inch/dp/B071LJXKMP?th=1&psc=1
And it's the one I bought from aliexpress which is cheaper than the talon grip but similar to it.
Link : https://m.aliexpress.com/item/32933326999.html?pid=808_0000_0101&spm=a2g0n.search-amp.list.32933326999&aff_trace_key=804d056dcb044953931fc19c8601cf02-1555125843610-05253-UneMJZVf&aff_platform=msite&m_page_id=PAGE_VIEW_IDCLIENT_ID(aefeMsite)NAV_TIMING(navigationStart)
Did you know Amazon will donate a portion of every purchase if you shop by going to smile.amazon.com instead? Over $50,000,000 has been raised for charity - all you need to do is change the URL!
Here are your smile-ified links:
https://smile.amazon.com/TALON-998R-Grips-Rubber-Black-7-Inch/dp/B01FLQO5IU/
---
Never forget to smile again | ^^i'm ^^a ^^friendly bot
Grab-on foam grips might help. Alot of people swear by them.
I bought this. There is a Motion Pro one also that has no grip included. I think they're the same thing. You have to file down part of the cable routing thing I think around 1/8'' to be able to open the throttle 100%. I just matched it up to the old tube I pulled off.
The grip that comes on the one I linked is a piece of shit and made my hand fall asleep in like 10 minutes, even with a fairly light grip.
£36.49,suitable for 50cc upwards, get very warm fairly quickly https://www.amazon.co.uk/Oxford-Products-OF772-Heated-Grips/dp/B00GOVEUAU/ref=mp_s_a_1_6?keywords=oxford+heated+motorcycle+grips&qid=1575116272&sprefix=oxford+heated+&sr=8-6
£39.25, not used them so dont know what they're like https://www.amazon.co.uk/Oxford-Products-Commuter-Motorcycle-Hotgrips/dp/B00APJJQHY/ref=mp_s_a_1_7?keywords=oxford+heated+motorcycle+grips&qid=1575116272&sprefix=oxford+heated+&sr=8-7
I've been using these for 2 years. Helps with throttle control too.
https://www.amazon.com/Grip-Puppy-Comfort-Grips-Original/dp/B00CP9ADD8/
Talon Grip Sheets!! Cheaper than d-brand just not cut to shape.
I got some to make tiny strips to put on the sides of cases that need more grip
Edit: Downvoted?? They work wonderful! /u/tlaatonmai here's the link https://smile.amazon.com/TALON-998R-Grips-Rubber-Black-7-Inch/dp/B01FLQO5IU/ref=sr_1_2?ie=UTF8&qid=1505652150&sr=8-2&keywords=talon+grips
Here's some pictures: https://i.imgur.com/vqhBo80.jpg
https://i.imgur.com/bb1CT2c.jpg