Reddit Reddit reviews RAW 79 mm 1 1/4 Hemp Plastic Cigarette Rolling Machine

We found 70 Reddit comments about RAW 79 mm 1 1/4 Hemp Plastic Cigarette Rolling Machine. Here are the top ones, ranked by their Reddit score.

Cigarette Machines
Cigarette Accessories
Tobacco-Related Products
Household Supplies
Health & Personal Care
RAW 79 mm 1 1/4 Hemp Plastic Cigarette Rolling Machine
79 mm cigarette rolling machineRaw 79 mm roller cigarette maker for 1 1/4 size rolling papers
Check price on Amazon

70 Reddit comments about RAW 79 mm 1 1/4 Hemp Plastic Cigarette Rolling Machine:

u/lukistke · 9 pointsr/saplings
u/Axeking12 · 6 pointsr/ontario

Hey buddy. Im not the guy to talk to about THC levels and all that. But the prerolls are kinda expensive. If u were gonna use those regularly I recommend hopping on amazon and getting the RAW joint roller for 10$. It works well and will save u money in the long run
https://www.amazon.ca/RAW-Plastic-Cigarette-Rolling-Machine/dp/B002CNE9H8/ref=mp_s_a_1_3?ie=UTF8&qid=1539797371&sr=8-3&pi=AC_SX236_SY340_FMwebp_QL65&keywords=raw+rolling+machine&dpPl=1&dpID=41nISmL1jVL&ref=plSrch

u/The_Time_Lord · 6 pointsr/IWantToLearn

Practice is the only way to get good. I would recommend picking up a rolling machine such as this one. Saves a ton of time and headache.

u/superjew- · 5 pointsr/saplings

My cop out suggestion is to get a joint roller on amazon. They take a little trial and error (the first time i used it [4] i made it explode and my weed got all over me) but once you get it right it makes perfect

https://www.amazon.com/dp/B002CNE9H8/ref=cm_sw_r_cp_apa_1h1sybB0M7NEH

u/HQV701E · 5 pointsr/canadients

I use one of those RAW Rolling Machines as I very rarely smoke joints but sometimes they're necessary for parties or events. My hand rolling technique is trash and they come out looking like a joint from the 70's so this setup is pretty great for uniform size and shape results.

u/wimpwad · 5 pointsr/mapletrees

You could always try a joint rolling machine and see if you like that. Im so bad at rolling, but using the machine works like a charm I find. An extra $2-3 just for them to roll it for you is quite steep when you think about it, and the machine pays for itself after 4 uses at that rate.

https://www.amazon.ca/RAW-Plastic-Cigarette-Rolling-Machine/dp/B002CNE9H8

u/Scarvis12 · 4 pointsr/TheOCS

Answers.

I mostly vape. I also have a bong. I don't usually smoke canons/cones. I can roll by hand, and do, if I'm rolling something big, but for just myself and my girlfriend, I just use the RAW 1 1/4 papers and roller with the cellulose filters.

I do not use tobacco. Only smoke straight green.

I do rehydrate now, only in the last few months. Never used to. Always just picked up and smoked right out of the bag.

It does make it easier for rolling a burns a bit smoother IMO.

With the roller, you pack the weed in with a filter, close it shut, spin it and it will compress the weed to the same side/shape as the filter. Once you've rolled and compressed, slide in the edge of a paper, start spinning the roller and it will pull the paper in and wrap it around the weed and filter. Open it and you have a perfect "cigarette" every time.

When rolling cone, larger joints, cross joints, etc... I like to use something to roll the paper with, a pen, a rolled up sheet of white paper, etc... To make it easier to hold the shape. Roll the paper around whatever I'm using and stick it to create a hollow cone/tube. Then I slip a paper filter/tip from the top, down to the bottom and let it unroll itself a bit to fit the open, then fill the weed in from the top. Different people have different methods. My "hand roll" method is a bit unorthodox and "assisted" but a lot easier than fumbling weed everywhere. If that's. It an option, just use the fold in a pack of paper to hold and fill with weed, then tuck/roll a corner and spin it between your fingers, similar to what the roller does.

I prefer to use the rollers though.

If you want to pick some up to try for yourself, here's the links:

The simple RAW 1 1/4roller:
https://www.amazon.ca/dp/B002CNE9H8/ref=cm_sw_r_cp_apa_i_cKLXCbHRW125D

With 1 1/4 papers: https://www.amazon.ca/dp/B0066WMVPS/ref=cm_sw_r_cp_apa_i_bMLXCbGKAAPZE

With the slim, cellulose filters (a lot easier on the lungs): https://www.amazon.ca/dp/B06XH6QGCX/ref=cm_sw_r_cp_apa_i_kNLXCb5DB9S6T

u/MeltsLikeButter · 4 pointsr/trees

Looks solid, nice job! I take the easy way out and just use a roller. RAW 79mm 1 1/4 Hemp Plastic Cigarette Rolling Machine https://www.amazon.com/dp/B002CNE9H8/ref=cm_sw_r_cp_apa_ysbuyb9KZCJWV

u/Snowpossum · 4 pointsr/trees

Grab a papers roller box for him. They can be used one handed and are cheap.

u/-Greenlung- · 4 pointsr/trees

https://www.amazon.ca/Hemp-Plastic-Cigarette-Rolling-Machine/dp/B002CNE9H8

I dunno why anyone would do it the hard way when these things make it a snap. Takes me ~15 sec to roll a joint with mine.

edit: For the 2-5 times a year I want to waste pot by passing a joint around. My bubbler or vape are far more efficient...

u/Drizzle8888 · 4 pointsr/trees

RAW 79 mm 1 1/4 Hemp Plastic Cigarette Rolling Machine https://www.amazon.com/dp/B002CNE9H8/ref=cm_sw_r_cp_apap_edMOkcAuvMmwN


I can't roll for shit either. This makes it simple and cake to roll perfect every time. Look into vaporizers! It will change how you use weed for ever!

u/ajchann123 · 3 pointsr/saplings
  1. A spliff, by definition (in the US), is a joint with tobacco mixed in. When I used to smoke cigarettes, making a spliff was a great way to use less weed, and many believe smoking tobacco with weed enhances you high a lil

  2. Yes, that's a fair amount for a standard J

  3. There are a lot of great videos on youtube (like this one!), but it basically just takes practice and discovering your own preferred method. However, nowadays I just use this plastic joint roller that actually works perfectly. I get a perfect J every time when I use this

  4. It all depends on how much airflow you want. That said, a J/blunt/spliff works better with ground weed, while picking can get the job done in a moment of desperation haha you would just need to make sure it's rolled well in that case

  5. No difference. Your dad's method is also my preferred method and arguably adds more support for the crutch, but its just a preference

  6. HA! I would actually buy all those strains haha they mean nothing though and the name only roughly associates to a "family" of weed. Many times, strains will be named after the two strains they are made from. Example: Purp OG is just OG Kush mixed with Purple Kush, and so on
u/glitcher21 · 3 pointsr/trees

Buy one of these.

But if you're wanting something now you can always use 2 pencils, wrap the paper around one, lick it and seal it like you're rolling up the pencil and then push the paper up the pencil and pack the weed into it with the second pencil until the paper is full. Then twist it at the ends and fly to the moon.

u/iKojack · 3 pointsr/trees

I dont know about cigarette injector, but before I learned how to roll joints I had bought a raw roller. It makes flawless joints and it's really quick. this is the one I got. You can get a 1 1/4 size and a king size. But now I roll my joints faster. It just takes practice man.

u/Juanathin · 3 pointsr/trees
u/soberanotherday · 3 pointsr/trees

https://www.amazon.com/RAW-Plastic-Cigarette-Rolling-Machine/dp/B002CNE9H8

I believe he’s talking about something like this and if that’s the case these will make your life 100% easier if you can’t roll too good on your own

u/Jrskf · 3 pointsr/Cigarettes

For cost savings, maybe try rolling your own. As I understand it, there are different levels of it, where the more skill you have the less complicated the tools are. You can freehand roll them, use a plastic machine
Or use an injection machine with filter tubes which are like cigarettes without the tobacco.

u/theghostofkurtcobain · 3 pointsr/trees

buy a pack of Randy's to learn with. The wire in it makes it easier to learn rolling technique. They arent the greatest but do the job and it has the built in roach holder. Or get this and a grinder and they work awesome

u/Jeet_Kune_Do · 3 pointsr/saplings

good idea! i just bought this to match these papers! and you put up a very valid point with the technicalities of the tubes vs thin rolling paper and the filters! thanks for ur input!

u/The_____Truth · 3 pointsr/trees

I can tell you the secret... for about tree-fiddie

And by that I mean buy the aforementioned rolling machine... it's just over 3.50 on amazon with free shipping.

u/Climbs-the-steel · 3 pointsr/weed
u/-Vape-Nation- · 3 pointsr/saplings

Like the other guy said, spoon pipes are alot less of a hassle, but if you insist on joints here's my suggestions:

  1. RAW/Zigzag

  2. [This wan] (https://www.amazon.com/79mm-Plastic-Cigarette-Rolling-Machine/dp/B002CNE9H8)

  3. You can make your own easily with business cards and what not but if you want go with RAW filters.

  4. Mason Jars FTW

  5. Mason Jars FTW

  6. Weed
u/ArmatureArt19 · 3 pointsr/Cigarettes

Loose filters can be a number of problems. Too small of a filter being the easiest thing to blame it on. If you roll straights it can be hard to make the filter stay in, I usually try to keep the filter rolled as tightly as possible and pinch it between my fingers when rolling so it will expand to fit the paper when I let go, I sometimes rip gum tips off papers and use the glue to keep filters in when I'm having trouble. Alternatively if you roll straights, I find rolling cones really makes the filter sit better, as well as smoking better. If all else fails a raw rolling machine (I bought mine couple years back at my local headshop couple years back for something like 4$, and its never failed me) is a great investment for really cheap and wont break on you anytime soon. If you load one of these with about a .8 of rolling batch and a pretty fat filter it will roll you something that is extremely similar to a brand name somke in both look and feel. Good luck and happy rolling.

u/Musicduude · 2 pointsr/trees

Anything "RAW" in that case. Without spending too much money I'd suggest a raw rolling tray, raw papers (1 1/4 size is what most people roll with), and some tips! If he has a difficult time rolling his own joints you could always get him a rolling machine. They're pretty cheap.

Rolling machine

Tray

I cannot vouch for the machine, but everything else is pretty basic. Pretty much everyone uses Raw papers these days. I prefer variety myself, but yeah.

u/the1osu · 2 pointsr/trees

It's the RAW 1.25 roller. You can get it here on Amazon

u/UKUK8 · 2 pointsr/Brampton

Yes but it will stink and also taste differently when you relight it.

I’m not sure about at Ganjika or the OCS but at the Wee Smoke Shop in dt Brampton you can buy rollers. The brand is Raw and it’s no more than $10. It’s a little contraption where you put the weed into it and a filter paper, then you just close it, feed a rolling paper through, give it a twist, lick the paper and you have a smokeable joint. (Not the prettiest or best roll but it’s fast and small and convenient). Here’s a link to it on Amazon

u/bettorworse · 2 pointsr/Damnthatsinteresting

Almost everybody had one of these, tho

u/BALTHAZ4R · 2 pointsr/trees
u/touchy610 · 2 pointsr/trees

If I don't feel like rolling, I use one of these. Cheap, and effecient.

u/DaMurkySturgeon · 2 pointsr/eldertrees

get a rolling machine:
http://www.amazon.com/79mm-Plastic-Cigarette-Rolling-Machine/dp/B002CNE9H8

I have one of these and it works like a champ.

u/MainsleyDesign · 2 pointsr/bostontrees

Ever used on of these? Cigarettes are horrible for your circulation which won't help your dexterity. Do you like rap music? You could get yourself an MPC instead of a guitar and make some beats or something...

u/Danteinferno500 · 2 pointsr/trees

There was a thread not too long ago (maybe an hour) talking about some tips and tricks for rolling. If you like me and can't roll to save your life, pick one of these up.

https://www.amazon.ca/RAW-Plastic-Cigarette-Rolling-Machine/dp/B002CNE9H8

u/smileysocks · 2 pointsr/woahdude

Try using a cigarette roller. My thumbs are shot and this makes it super easy.

u/cHorse1981 · 2 pointsr/weed

As far as rolling a joint goes if you don't have the patience to master doing it freehand you can always get a rolling machine. They are sized to fit a particular size of paper so be sure the roller and papers are the same size.

Trade-Ctore RAW 79 mm 1 1/4 Hemp Plastic Cigarette Rolling Machine

how to video

u/headpool182 · 2 pointsr/ontario

Well, mine is Raw, I got it from Rock universe. Most headshops should have them. Or buy from Amazon - https://www.amazon.ca/RAW-Plastic-Cigarette-Rolling-Machine/dp/B002CNE9H8

ninja edit: OCS might have some under accessories

u/theboysaccount · 2 pointsr/trees

Joint Roller


check this out, I don’t use it but I heard it gets you perfect joints every time!

u/longtimelurker- · 2 pointsr/entwives

I highly recommend a Raw “cigarette” rolling machine! Once you get the hang out of it, there’s no turning back!

u/BurgrMeistr · 2 pointsr/trees

you twist it in case you dont plan on smoking it within an hour or so and you are worried about it falling apart.

looks pretty loose so it was a good idea for him... goodtry/10 bro
maybe think of investing in a roller-

http://www.amazon.com/79mm-Plastic-Cigarette-Rolling-Machine/dp/B002CNE9H8

u/One_Crazy_Dude · 1 pointr/trees

Not really. The stuff you're thinking of putting in it is typically more moist and doesnt pack as well in a machine of this caliber. Save the $70 bucks and maybe go with something like this instead.


http://www.amazon.com/gp/aw/d/B002CNE9H8/ref=mp_s_a_1_3?qid=1449539448&sr=8-3&pi=SX200_QL40&keywords=cigarette+roller&dpPl=1&dpID=41m6FQ7ldPL&ref=plSrch


Although hand rollies still work better i think.

u/TomSawyer410 · 1 pointr/PipeTobacco

I've never used them. If you're not familiar with hand rolling I recommend this like thing.

Don't try to overstuff it and you'll make perfect little cigarettes. Use 1.25 papers.

u/op4daze · 1 pointr/trees

It always takes awhile for me, never could roll a decent one quick.. I picked this up a few years ago. Perfect every time. https://www.amazon.com/dp/B002CNE9H8/ref=cm_sw_r_cp_awd_OAXPwbAFVSDAH

u/PhosphorescentWave · 1 pointr/trees

Try a rolling machine (Amazon). I've given up on hand rolling. Honestly even the rolling machine was a pain in the ass for me to get right (took me like 20 attempts after watching a REALLY simple youtube video) but eventually I got it right.

The thing I figured out was that the herb needs to be somewhat dense for it to roll right. I only like to smoke a little at a time so I didn't want to fill the entire joint.

I fixed that by cutting a piece of a plastic drinking straw and stuffing it with rolled up filters. I put the straw at one end of the roller, and the (actual) filter at the other, that way I can pack herb into the open area tightly without using too much.

Now that the herb is packed in nice and tight, I roll it up, seal it, and kind of pinch the straw out of the joint and twist it up. They come out a little pathetic looking but who gives a shit? They smoke really nice and it's the perfect amount.

If you're interested I can take a few pictures to illustrate what I mean about the straw.

u/FlatulENTz · 1 pointr/trees

Those cheap little rolling machines really work.

Example ----> www.amazon.com/79mm-Plastic-Cigarette-Rolling-Machine/dp/B002CNE9H8

u/corruocorruo · 1 pointr/trees

Maybe buy a grinder and a vape. Or even cheaper, a grinder and a rolling machine like this

u/AlamedaBrian · 1 pointr/trees

I cheat and use a cigarette rolling machine, like this:

http://www.amazon.com/79mm-Plastic-Cigarette-Rolling-Machine/dp/B002CNE9H8

Plus the tips they have in the "frequently bought together". Perfect cylinders every time, no burnt fingers or lips.

u/g4howie · 1 pointr/trees

I can't stress how awesome the automatic cigarette rollers are. They are 5 bucks, and worth their weight in gold.

it takes about 2 minutes to learn how to use it.
every joint you roll is perfect, cylindrical, tight, same diameter of a cigarette. and because they are so perfect, they look a lot more like a cigarette.


edit: here is the one i have
http://www.amazon.com/79mm-Plastic-Cigarette-Rolling-Machine/dp/B002CNE9H8

u/Blacklightrising · 1 pointr/trees

That's cool, no judgement. But a rolling machine like this one. https://www.amazon.com/RAW-Plastic-Cigarette-Rolling-Machine/dp/B002CNE9H8/ref=sr_1_1?keywords=rolling+machine&qid=1572918887&sr=8-1
A pack of papers and a Glass crutch are minimal effort for a much more powerful and cheaper experience. https://www.amazon.com/Premium-Rolling-Genuine-Cigarette-Straight/dp/B07BMXR6GC/ref=sr_1_3?keywords=Glass+Cigarette+Rolling+Filter+Tips&qid=1572918993&sr=8-3
The smallest amount of effort will afford you a better experience, that's all I wish to point out.

u/tinyjb · 1 pointr/Marijuana

Idk about blunts, but I do know joints.

For joints, the #1 mistake that I've learned not to make is to roll it/pack it too tightly. If you roll it or pack it too tightly, that joint will be running like a mf. It took some time for me to feel what is an overly packed joint.

Basically, if you squeeze it and it doesn't budge nearly at all from how tight it is, it will start running.

To avoid this problem, I do this: After I roll the joint, I twist 1 end. If I feel that it is too tight, I start rolling the joint in my fingers to loosen it, it's okay if a little weed falls out. It is kind of difficult for me to describe when a joint is not overly packed/too tightly rolled but also not "loose" either.

Again, basically if your joint is so tight that it feels like a candle stick and will not "give" when you squeeze it, you need to do the loosening technique. An under-packed joint should be obvious as weed will be able to slide up and down the joint.

Here is the joint roller that I use. It took some practice to learn how to roll good joints that weren't too tight or too skinny, but once I learned how to roll joints well with this, I never rolled by hand again.

u/benzarella · 1 pointr/weed

You should get a joint/cigarette roller like this one . It’s great for shaky hands because it does all the work for you. They are also cheap. One of these would help you so much!

u/MyLittleGrowRoom · 1 pointr/StonerEngineering

Amazon has them for less than $5, and my local tobacco shop has them for less than $3. Amazon Raw Rolling Machine

u/crypticsmellofit · 1 pointr/portlandtrees

you can also just get filters and papers, and use a rolling machine: https://www.amazon.com/RAW-Plastic-Cigarette-Rolling-Machine/dp/B002CNE9H8/ref=sr_1_3?keywords=rolling+machine&qid=1558931853&s=gateway&sr=8-3 put the filter in at one end and put the flower in the rest...

u/MechanizedMedic · 1 pointr/trees

Maybe try one of these little rollers if you want to start rolling your own. Takes about a minute to make a perfect rollie without a fuss... I like to pack mine extra tight so they go out if I don't keep puffin.

u/frickxoff · 1 pointr/trees

I use a grinder. The buds don't break up enough for me when I do it by hand. Use a RAW rolling machine to roll joints. They burn a lot better that way because I can't roll a joint on my own to save my life. Lol

u/ronnieboy25 · 1 pointr/trees

If you smoke regularly then I recommend you get this https://www.amazon.com/dp/B002CNE9H8/ref=cm_sw_r_cp_api_sqlqzb3NDCH8J. Buy some Elements King size Papers and a pack of tips. You'll save a lot of money!

u/canniferous_rex · 1 pointr/canadients

I would advise you to pick up a Raw rolling machine and your own bud. Pre rolls can be made with shitty floor weed much like fake cigars are.

Not saying they all are, but some definitely are made with crap quality and its much easier to make pinners with that machine.

u/frbap · 1 pointr/ontario

Just get a roller.

Bought mine for like 5 bucks from a corner store.

u/tidefan · 1 pointr/trees

Trade-Ctore RAW 79 mm 1 1/4 Hemp Plastic Cigarette Rolling Machine https://www.amazon.com/dp/B002CNE9H8/ref=cm_sw_r_cp_apa_vMdEzbS3HPJF6

u/Gyis · 1 pointr/trees

Just get a cigarette roller. They are cheap, easy to use, and roll a perfect joint every time.

https://www.amazon.com/dp/B002CNE9H8/ref=cm_sw_r_cp_awdb_t1_whtmDbKRM9TMZ

u/chuck138 · 1 pointr/StonerEngineering

This probably wouldn’t work for dry papers but they do make really cheap machines just for that. They come in many different sizes for typically under $10. It’s the only way I can roll lol

RAW 79 mm 1 1/4 Hemp Plastic Cigarette Rolling Machine https://www.amazon.com/dp/B002CNE9H8/ref=cm_sw_r_cp_api_i_Vf0nDbMJ06HET

u/Kromulent · 1 pointr/trees

They make little plastic ones that you can get anywhere you buy papers. They come in different lengths, and it's best to get the one that matches the paper you like. Here's one example:

https://www.amazon.com/Hemp-Plastic-Cigarette-Rolling-Machine/dp/B002CNE9H8/ref=sr_1_3_a_it?ie=UTF8&qid=1511527866&sr=8-3&keywords=rolling+machine

It's hard to explain until you have the machine in your hands, but you can roll just as tight or as loose as you want by applying a little finger pressure to the bars. You'll see.

Once you get the hang of the machine, you can do the same thing with a dollar bill. Again, its hard to explain, but once you see it happen if front of you it's easy.

u/insert_comical_name · 1 pointr/trees

This is the one I got and here is a larger one.

u/kleptomaniEnt · 0 pointsr/trees