Best wheel adapters & spacers according to redditors

Going narrower isn't bad in and of itself. Between the small change in offset, and the new tires being a tad larger (0.4") I'd be a little (not a lot) worried about rubbing.

If you address the offset difference with a set of spacers you'll probably be fine with the slightly larger tire.

I'd also double-check the load and speed ratings of the tires, and compare the GWVR (check the door sticker) of the Mazda 3 vs. the Sienna. It's probably ok... really. I'm probably being a ninny. But I'd worry a little about the wheels maybe not being up to spec for an extra ~1500 pounds plus the amount of cargo a minivan can carry.

They are aluminum, Ill see if I can find them online and link them, but my buddy originally bought them and sold them to me. Like I said, theyve been on my ranger, my explorer, and his jeep as well. I highly recommend them, if youre interested in the stance. You do need an alignment afterwards though.

Edit: These pretty much look exactly like mine. Im not sure about the great handling it says it gives, but my wheel turn radius is pretty nice.

Use wheel adapters!

https://www.amazon.com/dp/B07P7B3F71/ref=psdc_15706591_t1_B009N3JTQQ

I put a set of wheels from a 2008 Sahara on my 2000 TJ. I don't know the backspacing and other measurements off hand, but the overall dimensions should be close to what you are running. I posted a pic of my jeep with the wheels on it in this sub a little while ago.

Here are the adapters I bought. https://www.amazon.com/gp/aw/d/B06WLN2ZF8?psc=1&ref=ppx_pop_mob_b_asin_title

At first I thought the spacing was going to be too much. But, once I had them on the jeep I realized that the larger adapter stops rubbing on the arms at full lock. My JK wheels fit great and don't rub. I suggest you get a larger adapter than one and quarter inch.

Oops, 1.25", sorry.

https://www.amazon.com/Rugged-Ridge-15201-20-Spacer-Renegade/dp/B01M21FIE3/ref=sr_1_2?ie=UTF8&qid=1505763858&sr=8-2&keywords=JEEP+RENEGADE+WHEEL+SPACERS

I recently did exactly that (3 inch lift, 31s). If you're looking for ideas or reference, here is "Jade". (Mall parking lot of course. Havent taken her out since I did it)

I did it relatively cheap as far as lifts/tires/rims go. List goes as follows:

BFGoodrich All-Terrain T/A KO2 LT31X10.5R15 - $175 x 4 = $700

Pro Comp Steel Wheels 15x8"/5x4.5" $55 x 4 = $220

3 in Rough Country lift $293

Hubcentric Wheel Spacers $27.50 x4 = $110

They installed my lift at Mavis for $390 labor. It was a pretty fair deal.

All in all ~$1700.


I'm about to get a pair of Smittybilt bumpers this week.

Warning. Your fenders will rub. I'm cutting and putting flares on because I need them anyway for legal reasons.

(4) 50mm (2") 5x114.3 (5x4.5)... https://www.amazon.com/dp/B01C7QZVR6?ref=ppx_pop_mob_ap_share

They are the $80 Amazon ones made by custommadeonly in black, and the tires are the standard 245s. It's a 2017, but it only had 16k miles when I purchased it....17.5k now, so the tires are still excellent. I believe if you are interested you can look in my profile and see a previous post with close ups of what the fitment looks like.


I'll try to link the spacers.
https://www.amazon.com/Customadeonly-HUBCENTRIC-SPACERS-ADAPTERS-5X114-3/dp/B06XKKNV1T/ref=mp_s_a_1_4?keywords=20mm+wheel+spacers+wrx&qid=1562687674&s=gateway&sr=8-4

Link

15mm

https://www.amazon.com/KSP-Spacers-Hubcentric-Volkswagen-Warranty/dp/B07KQ6RFS6/ref=mp_s_a_1_3?keywords=57.1+5x112+spacers&qid=1550593024&s=gateway&sr=8-3

And

20mm

https://www.amazon.com/KSP-Hubcentric-Spacers-Volkswagen-Warranty/dp/B07KQ6QFN7/ref=mp_s_a_1_2?keywords=57.1+5x112+spacers&qid=1550593024&s=gateway&sr=8-2

KSP M12X1.25 Wheel Studs Lug... https://www.amazon.com/dp/B07JGNR83L?ref=ppx_pop_mob_ap_share

Here: 2 Pc | Front Or Rear | 10mm Black Hub Centric Wheel Spacers ONLY | 5x100 MM & 5x112 MM | 57.1 MM Hub Bore | Fits Audi A4 A5 A6 Quattro Volkswagen GTI Jetta & More https://www.amazon.com/dp/B07C3WZHCW/ref=cm_sw_r_cp_api_lip8BbH15HSDG

That’s the right size

>5x112 bolt

cant i just use this? i dont have much experience on rims but i really want my audi to look like that picture above!

ECCPP from Amazon

No problem!
These are the ones I ordered. I believe the same company makes a couple different sizes.

Supreme Suspensions - (4pc) 1999-2004 Jeep Grand Cherokee WJ 1.25" Hub Centric Wheel Spacers 5x5" (5x127mm) with Lip + 1/2"x20 Studs [Black] https://www.amazon.com/dp/B019YTXFV8/ref=cm_sw_r_cp_apap_xatLXQZ51htNX

Jeep JK XK WJ WK Wheel Spacers 1.5" 4pcs, Jeep 5x5 / 5x127 Wheel Spacers with 1/2-20 Studs for 2007-2018 Jeep Wrangler JK, 1999-2010 Grand Cherokee WJ WK, 2006-2010 Commander XK https://www.amazon.com/dp/B01MYYY0P3/ref=cm_sw_r_cp_apa_qvcVBbDZQZCH9

Hey, I've got the same tires!

Also, try these. I'm putting them on my rearend, which is off an 84 Camaro apparently, if I don't end up swapping the whole rearend first...

The lug studs come out an inch and there aren’t gaps in the rim

https://www.amazon.com/dp/B01FHICNH2/ref=cm_sw_r_cp_api_i_6i34CbHS2S03V

They are OEM G37S 19” rims. I had the same vibrations with the spacers on with my stock 18” rims as well. No vibrations without spacers w/ the stock 18” wheels. I’m sure I’d have no vibration with the 19” wheels without spacers, but haven’t tried it because the spacers are necessary for fitment.

They’re both 66.1 bore size as well as the spacers. I don’t have pics of the spacers but I’ll add the links. Disclaimer, they are cheap spacers which would very well be my problem, but I’ve heard of vibrations on the forums even with high quality spacers ... due to a deep bore?

20mm spacers

25mm spacers

Edit: spelling

Going to get [spacers](http://www.KSP.com/ Forged Hubcentric Wheel Spacers 5x100 5x112, 20mm Thread Pitch M14x1.5 Hub Bore 57.1mm with Sphere Seat Lug Bolts Fit for Audi A3 A4 A6 A8 S4 S6 S8 Quattro TT Volkswagen, 2 Years Warranty (5 Lug) https://www.amazon.com/dp/B07KQ6QFN7/ref=cm_sw_r_cp_apa_i_CQ1vDb7D39XH7) to make them fit. I have 2 bad rims (OG Detroit's) right now and I'm going through tires like crazy. Wanted to get a 4 set of new tires and these don't look bad.

Just want to be sure the fit, spacers, and bigass sidewalls will be ok for a few months before I get some thinner tires.