Best costume accessoreis for kids according to redditors

https://www.amazon.com/Hasbro-78268-Hulk-Smash-Hands/dp/B000XUA6KG

Looks like it could be this?

https://www.amazon.com/Avengers-Infinity-Gauntlet-Articulated-Electronic/dp/B071WT4KLM

It has the same protrusion under the soul stone

This is a bit off topic but I like that they at least tried to give her an accurate wand.

The review by James - maybe the greatest Amazon review ever

Looks like $99

Marvel Legends Series Infinity Gauntlet Articulated Electronic Fist https://www.amazon.com/dp/B071WT4KLM/

House Pins

Horcruxes

Amazon is a beautiful website!

Pitchfork only $8.95 and torch only $4.70 but you need to buy some for free shipping. damnit. But still cheaper than a Mechpak!

linky link for the pre-order

https://www.amazon.com/Daron-Wiper-Glasses-Blue-Lights/dp/B00BQVZMNC

I just bought mine off of Amazon. Part of the legends series. https://www.amazon.ca/gp/aw/d/B071WT4KLM/ref=mp_s_a_1_1?ie=UTF8&qid=1523908372&sr=8-1&pi=AC_SX236_SY340_QL65&keywords=infinity+gauntlet

I would love to see some hulk toy style fist holding a forge-hammer foam hands for sale as merch.

HULK HANDS

I believe the orders are closed on amiami as of now, but here's the USA release page ;)

https://www.amazon.com/dp/B07845MRPN/ref=nav_timeline_asin?_encoding=UTF8&psc=1

Nobody will bother you if you wear this one....

https://www.amazon.com/dp/B072QN51ZG/ref=cm_sw_r_cp_apa_i_VbltDbDV8K2V0

You should get her a Snitch Necklace!!

There is a wide variety of 'Snitch' designs in Etsy. And on Etsy you can categorize by shipping worldwide or not. Also you can get it on Amazon. I believe some of them ship from China

http://www.amazon.com/Potter-Enchanted-Steampunk-Necklace-Battery/dp/B007RBMP9E/ref=sr_1_69?ie=UTF8&qid=1371501928&sr=8-69&keywords=harry+potter

Amazon. It's only $10 over msrp. That's not bad.

All you need are these.

You could get this one! Down from $99 to $52 - https://www.amazon.com/gp/aw/d/B01B4NLML2

It takes a lot of time. You need the right tools. Id' have an exacto knife, some clippers, some files, a good glue, and probably some gap filler. Oh, and a cutting board to work off of.

I linked some examples to give you an idea, you can feel free to find a particular product that works for you, although I do really like the Tamiya glue. There are a lot of little pieces so some people might like some tweezers as well. I use cupcake wrappers to help keep the pieces in one place as I'm assembling and keep them from getting lost. I'd recommend not working over carpet as a dropped piece might get lost forever in there.

As others have said, Vibrant Lantern has some great build guides, which are probably required for more complex models like the Phoenix.

Otherwise, don't let the amount of sprues overwhelm you. Pick a miniature to assemble and finish it before moving on to the next one. Most of them are fairly straightforward. I would really recommend you take your time in assembly, as getting the edges filed and gaps filled will pay off in the long run - nothing worse than a well painted model with gaps and mold lines showing. There are plenty of videos out there on how to do this if you aren't sure or just want some additional instruction.

Start with the White Lion and starting survivors. The Screaming Antelope and Butcher will be the next ones to tackle. All of these are fairly easy to assemble.

I got you covered, friend! Sleeping?? No way, you're totes awake and working!

Buy time machine from mzad qatar and Go back to the reality where captain america restored all the stones.

​

or

https://www.amazon.com/Legends-Infinity-Gauntlet-Articulated-Electronic/dp/B071WT4KLM

Original Marvel item.

170 usd (620 QAR) including shipping to Qatar

1.) Something that is blue.
This Neblua Funko Pop is not only cute, but also BLUE.
Because Mother's Day is around the corner, how about this gorgeous necklace?
Not only that, but are you a fidget kinda preson? Then this is the perfect thing for you!

2.) Something that says summer (literally or figuratively).
Gotta love summer! You know what comes with summer? Sunflowers!
For some reason, pineapples really remind me of summer. I can't really say why. They just, like, SCREAM "summer" to me.
Summer, to me, also means relaxing with a good book. And what better book than the next one in the Mara Dyer series by Michelle Hodkin?

3.) Something food related that is unusual.
Not sure if this counts as unusual, but I thought it was quite abnormal...
Also, I can't say I've ever seen a water melon cake-topper, though I'm no expert on cake toppers.
Also, if horror movies and the undead are your kinda thing, how about a side-dish of zombie?


4.) Something you want to gift to someone else, and tell me why.
I really want to gift this beautiful Pop moment to my brother, because he's amazing and deserves all the things.
I also want to gift this soundtrack to my sister because she's always singing, and I know it'd makes her happy.

5.) A book I should read! I am an avid reader, so take your best shot and tell me why I need to read it!
Oh my gosh, you are totally asking the right person. The Unbecoming of Mara Dyer is one of the best books that has ever existed. Not only that, but it's a series! Also, my username is taken from the first page of the book, so that must mean that it's good. It's got suspense, kids with powers, and some horror themes. It's just overall a great book. PLEASE check it out!
Another good book series is the Red Queen series by Victoria Aveyard. The final book is coming out this year, so I'm excited!
Why stop there? Another great book is All the Bright Places by Jennifer Niven. It will break your heart, but in a good way. It's a beautifully written book. I'm not sure what genre you like, but it reminded me of the genre of books like The Fault in Our Stars and Everything, Everything.
Another great series is The Darkest Minds series by Alexandra Bracken. Not only is a great series, but there's also a movie coming out in August that's based off the books! Better get reading. ;)

6.) An item that is less than a dollar, including shipping... that is not jewelry, nail polish, and or hair related!
These are totally adorable AND affordable! Talk about a deal.
Like writing? This notebook would be the excellent choice for the writer within! Or just someone who likes taking notes.
Have a cat? How 'bout some good ol' catfood?

7.) Something related to dogs. (Bonus point if it works for my GSD)
I don't know what GSD means I'M SORRY! But here is the cutest alligator plushie. Like if I was a dog I would legit want it for myself.
I stumbled across this adorable squirrel set thing and I am internally squeeing at the cuteness.
Okay by now I really want a dog. Somebody send me one pronto. Here's an adorable taco plush, because heck it's cute and funny and I really want a puppy.

8.) Something that is not useful, but so awesome you must have it.
Oh boy, you shouldn't have asked. It's the most expensive thing on my wishlist, and it's beautiful. I know, I know, it's a book, but it's more than that! It's a HUGE book with photographs from my favorite, most-loved movie series! Seriously. Words cannot describe how cool of a book it is. And there's a limited number of them made, and there's only 3 left in stock. But I digress. It's not what one would consider useful, but it sure is awesome.
Wait, what's that? I haven't mentioned Kylo Ren in 2 minutes? Oh boy, better change that. Yes, I love Kylo Ren. I'm aware that is a touchy subject with people. I don't care. I have a shrine in my room for Kylo Ren. This pillow is not what most people would call necessary, though honestly I would probably beg to differ.
Pretty much everyone can agree that Funko Pops aren't necessary, but they are so much fun oh my gosh. Like, for instance, this somewhat expensive yet cool Darth Vader Pop.

9.) A movie everyone should watch at least once in their life. Why?
I love movies. With a passion. But my favorite movies of all time, are The Hunger Games movies. If that wasn't evident by the massive expensive book above, then I don't know what is. But honestly, they're great movies. I know they're not for everyone, but they hold a special place in my heart.
Someone recently gifted me Moulin Rouge, and honestly it is so good. So, I also, of course, recommend that. It has singing, great vocalists, great songs, and a great plot. It also has Ewan McGregor, so what's not to like?
I saw Logan (the final Wolverine movie in theaters, and it is such a beautiful movie. Very sad, but very beautiful. The best Wolverine movie in my opinion. 10/10 would watch/cry again.
Another great futuristic movie is V for Vendetta. It's a well-known movie, and it's very good.
If you're into horror, I love the most recent Carrie movie. I know it's not for everyone, but I really liked it.

10.) Something that would be useful when the zombies attack. Explain.
I mean, I think it's pretty self-explanatory, but this bat would make a great weapon in the apocalypse. Also, if you're into leading an army and "saving" people, this bat will probably get you there. (Ahem I totally didn't just buy this bat for myself cough.)
Not sure if bright green is the way to go in the apocalypse, but I'm sure a bow and arrow set would keep you alive for a little bit. Especially if you happen to be Daryl Dixon (though I guess he technically has a crossbow... I digress).
Don't try and tell me that in the apocalypse you won't get peckish. Everyone knows that snacks will be the first to go. Better stock up on those sweet, sweet snacks.

Will edit as I go

1. Her name is blue, she is blue, and she sings “blue’s clues,” so...

2. He’a wearing sunglasses, he also sings “In Summer.”

3) These are actually pretty good.

4) My brother is obsessed with these movies.

5) This is a very profound book. Made me feel a full breadth of emotion, and left me satisfied at the end.

6) this decorative fan

7) Your dog could be the pope!

8) I love potatoes. I love plushies. Obvious choice.

9) Jurassic Park is the film that made me fall in love with movies. It’s fun, emotional, and a testament to the ingenuity, curiosity, and perseverance of humanity. Also dinosaurs are in it.

10) After the zombies arrive, I’ll want safe drinking water. It’ll be important, and maybe hard to find occasionally.

11) A new laptop would make being a writer much easier. My current laptop is slow and doesn’t want to work half the time.

12) Lysol wipes are never a bad idea. Trust me.

13) Star Trek is my favorite everything.

14) How about an inspiring dress?

15) Why not both?

16) This stuff. I love it so much.

17) I loved this weird Barbie doll.

18) You know when you’re out in public, and you think of this great idea, but by the time you get home you forgot it and wish you’d written it down? Yeah. I hate that.

19) Here.

20) My dad used to own a pair of these.

Wrong sub , but my cousin bought this one , it comes at a hefty price

Its this one: https://www.amazon.com/Legends-Infinity-Gauntlet-Articulated-Electronic/dp/B071WT4KLM/ref=sr_1_1?ie=UTF8&qid=1549912370&sr=8-1&keywords=hasbro+infinity+gauntlet

I use a file set to get rid of most of them. Blade are great, but sometimes they are just too fat to get into the little spaces.

https://www.amazon.com/Tamiya-300074046-Basic-File-Set/dp/B000BMUONA

Considering I'm 99% sure this is the bat he was hitting that guy with, nothing but stinging is going to be happening unless he hits an eye.

Are those finer than the basic set that tamiya has? I've been using the basic set here https://www.amazon.com/dp/B000BMUONA/ref=cm_sw_r_cp_awd_jiIBwbRBX5X36 and I can't tell from the photos on Amazon if they're different. I'm assuming finer.

Marvel Legends Series Infinity Gauntlet Articulated Electronic Fist https://www.amazon.com/dp/B071WT4KLM/ref=cm_sw_r_cp_api_9EuVAbCMJKBE3

Thanks!

It's a Marvel Legends Gear Captain America Shield Replica.
Link: https://www.amazon.com/Marvel-Legends-Captain-America-Shield/dp/B01B4NLML2

It needs to be wearing these.

Sweet! I got it about a year ago from Amazon.com. To my knowledge there’s only the two versions. I believe it was this seller. It’s definitely the same box mine came in.

Depends on what you're looking for!

​

Best of the Best? Korbanth is neat, and they have pretty short lead times. Really nice sabers, but pricy. They have two versions of his saber:

One without Weathering

One with Weathering

I'm still waiting on my graflex from them, but I've been speaking back and forth with Randy and he's always been polite and friendly, and quick to reply! I really appreciate that.

​

If you don't want to spend that much, and don't mind getting exactly what you pay for, there's always the Hasbro sabers.

​

And if you don't want something fully canon, but high quality, you could look at the Aeryn from Sabertrio. They have lots of customizations, and can do their sabers ranging from Stunt Sabers (Without sound) and Deluxe Sabers (High quality blades, sound, the whole shebang)

Amazon. $76.
https://www.amazon.com/Legends-Infinity-Gauntlet-Articulated-Electronic/dp/B071WT4KLM/ref=sr_1_1?crid=3RI1AKUG7GABW&keywords=marvel+legends+infinity+gauntlet&qid=1556319313&s=gateway&sprefix=marvel+legends+inf%2Caps%2C143&sr=8-1

Give tamiya a shot
https://www.amazon.com/dp/B000BMUONA/ref=cm_sw_r_cp_apa_i_p1o-Ab8R31PV5

Or spray painted this drink holder green
http://www.urbanoutfitters.com/urban/catalog/productdetail.jsp?id=25517392

Seems more feasible than the real hulk hands
http://www.amazon.com/Hasbro-78268-Hulk-Smash-Hands/dp/B000XUA6KG

It's ridiculously loud, but a great piece. Here you go.

I’m going to a Poke-Party!

I would dress as my GO avatar complete with a belt full of poke balls.

I would bring each of my children dressed as a first gen starter. My oldest would be charmander, my daughter would be squirrel and my little guy would be bulbasaur.

I would bring a semi-healthy snack and we’d play pin the tail on the pikachu to see who would win this.

Edit: I used to live in prime Pokémon GO territory. I had a gym in my driveway and a stop in my dining room and would set up a sign with the WiFi password and invite my friends over for some GO time and drop some lures.

harry potter neck lace

I'll drink to that


thank you for the contest.

Congrats! Keep us posted, it's always fun to see how peoples' journeys differ. I picked up a $9 set of files from Tamiya and it changed my skills almost instantly. They remove nubs much faster than any sandpaper, if you can get ahold of them I'd recommend also grabbing a higher grit sandpaper pad as well from a hobby store. Do a rough cleaning with the metal files then clean it up with increasingly higher grit sanding pads.

You can get seriously clean models if you use these tools right.

If you compare they're basically a cheap knockoff from the Nobel collection. Every set of hogwarts pins sold by that manufacturer has the same error with Ravenclaw and Hufflepuff. It's a deliberate "error." I assume it has something to do with copyrights they don't wish to pay.

https://www.amazon.com/Legends-Infinity-Gauntlet-Articulated-Electronic/dp/B071WT4KLM/ref=sr_1_1?ie=UTF8&qid=1523908034&sr=8-1&keywords=infinity+gauntlet

finally found on amazon thanks to someone elses brickseek link in another topic-

https://www.amazon.com/dp/B072QN51ZG/ref=olp_product_details?_encoding=UTF8&me=

Not OP, but I have those pins too. Here's a link on Amazon: https://www.amazon.com/Harry-Potter-House-Crest-Pin/dp/B002YXBEKG

https://www.amazon.com/Marvel-Infinity-Gauntlet-Articulated-Electronic/dp/B071WT4KLM

Soon you'll be able to buy a good cosplay version of it. [Shield]
(http://www.amazon.com/Marvel-Legends-Captain-America-Shield/dp/B01B4NLML2/ref=sr_1_3?ie=UTF8&qid=1457666021&sr=8-3&keywords=captain+america+shield)

Well, for all the walking he does to get Pokémon, how about these?

Or if one is trapped inside, and there are no Pokémon to be had...you can create your own by beaning someone with this...

...and lastly, this is just amazing.

Additional tools I would add if you have more money

Assorted Sandpaper $5 will last you a long time if you cut the strips. 800 and 1000 is all you need

Tamiya Model File set $9, You really only need the flat one

For decals
Q-tips for applying decals, I recommend you get two sizes ( i like the mini ones since they have less hairs)

Self healing cutting mat

Mr Mark Setter and Mr Mark Softener for rounded edges

Hopefully they have a Marvel Legends version like the OG Infinity Gauntlet (https://www.amazon.com/Legends-Infinity-Gauntlet-Articulated-Electronic/dp/B071WT4KLM)

https://www.amazon.com/Star-Wars-Black-Skywalker-Lightsaber/dp/B017KIQOSQ/ref=sr_1_2?s=toys-and-games&ie=UTF8&qid=1496212732&sr=1-2&keywords=luke+skywalker+lightsaber

Marvel Legends Captain America Shield (plastic) for $54

https://www.amazon.com/Marvel-Legends-Captain-America-Shield/dp/B01B4NLML2/ref=pd_sbs_21_21?_encoding=UTF8&psc=1&refRID=RQ2EQMMJY4SRBQ4RWH8T

In that case, have you tried using a file? Something like these: https://www.amazon.com/Tamiya-America-Basic-File-TAM74046/dp/B000BMUONA

I generally only use the one on top in the image. It's flat on one side and rounded on the other. Depending on the nub location I'll use either side, flat if there's a larger piece of nub then switch to the rounded side as I get closer to the part. I find the rounded part helps to avoid filing away the part itself as you get closer to it. The tapered end is good for tougher to get to places.

I've used the fully rounded one once and the big squared off flat one I almost never use. I find I end up scratching the part with it.

maybe she had these?

Honestly... at face value the kit looks okay but it probably comes with a lot of cheap crap you might not care about. I saw this in the similar section and I reckon that's enough if you wanna save a few more bucks and are keen on a set.

But if you're already willing to spend $20-30 then you can get what I suggested within that budget along with the knife you linked to (this and this, there's a few sellers for each you can get via Prime). That and some sandpaper from your hardware store and you'll be good to go dude.

Ultimately don't worry too much about the tools. You can make do with just sandpaper, a hobby knife and a crap pair of wire cutters and still do fine. Hell, that's all I had when I was a kid lol :P

Get some hulk fists and smash his.

I wore this at burning man and i think googly eye glasses
will bring the outfit together next year

Most of those look too coarse. Also, kind of pricey. Try these by Tamiya.

"It does not do to dwell on dreams, and forget to live."

Imperio. [One of the Harry Potter items on my wishlist.] (http://www.amazon.com/Potter-Enchanted-Steampunk-Necklace-Battery/dp/B007RBMP9E/ref=wl_it_dp_o_pd_nS_nC?ie=UTF8&colid=2LYI4JIRIZUTZ&coliid=I2AOS2YGHH21L5) And the other one Happy birthday! I hope you have a great one. :)

Get'em while they're hot: http://amzn.com/B01EXBRYEG

Sandpaper is really cheap at the hardware store, just get some varying grits (i go up to 1500). If you want files, you can probably find some good hobby ones, I use the tamiya file set. If you are going to be disassembling your kits for painting or whatever reason, spudgers are very helpful. Definitely top coat, Krylon Matte and Clear top coats are good, there are more hobby specific coats that are very good, but more expensive. Panel lining supplies are also good, either pens or ink for a panel line wash. Alligator clips on sticks are also handy if you are going to be top coating

There is another.
https://www.amazon.com/Marvel-Legends-Captain-America-Shield/dp/B01B4NLML2/ref=pd_bxgy_21_img_2?ie=UTF8&psc=1&refRID=ZB9QY9V7839J7YJXGJR0
edit: and I just realized the cheaper one is NOT metal. Ok, so I am pre-ordering the metal one at least until some reviews start coming out for it, I already have the King Arts Winter Soldier one so Ill have to decide if I actually get this one.

If this is the one you found, it is the correct one.

Compare to this.

nope but i did have some of these

Hulk Smash Hands

Dremmels are great with the right attachment - but I actually just use a set of files like these that are really effective and cheap. The squared off flat one is perfect for filing slightly uneven edges so that pieces meet up better - I use them extensively when modeling forgeworld models and tanks.

You can also use a nail file/emery board, though the hard plastic/resin will wear the emery board down much faster than the nails that they're made for.

Its literally as easy as trying to match up the sides, noting where the biggest protrusions are that are keeping it from being flush, then filing those parts down flat with a couple strokes of the file, re-aligning, repeat until they sit flush.

What model are you working on, and which parts specifically aren't matching up? I might be able to lend more specific advice.

I was looking at a set of files from Tamiya. Would this be a good set as apposed to sand paper?

Holy fuck, $175? Really? Weren't these like, $20 back in the early 90s?

http://www.amazon.com/Hasbro-78268-Hulk-Smash-Hands/dp/B000XUA6KG

This should be a better quality purchase. I have the tamiya files and use them frequently when I remove nubs prior to sanding. With metal files, my advise is to not OVERDO it - after shaving with a hobby knife, a few passes with the file is necessary to completely level the nub. If you overdo it, you will scrape off excess plastic. Just be careful :)

https://www.amazon.com/Power-Rangers-Mighty-Morphin-Morpher/dp/B00YYURBH2/ref=sr_1_1?ie=UTF8&qid=1517531413&sr=8-1&keywords=legacy+morpher

While the love shines through your efforts, it is possible to buy this online: https://www.amazon.com/Hermione-Grangers-Wand-Ollivanders-Box/dp/B000BVYQ9Y

​

​

Walking Dead Negan's Bat Lucille Foam Replica Prop Officially Licensed 36" Novelty Item Brand change to:trick or treat studios

https://smile.amazon.com/Walking-Lucille-Replica-Officially-Licensed/dp/B06XBHT9K7/

Links to products:

The two collectable wands: https://www.amazon.co.uk/dp/B07FYX59HS/ref=cm_sw_r_cp_apa_pHoYBbAYAFWS5

Lucius Malfoy Cane/Wand:
https://noblecollection.co.uk/product/lucius-malfoy-cane-with-wand/

Oddly enough the elder wand I have doesn't have any name plate and/or clip with dumbledors name on it. And I don't see it online either. Do you have a picture of what you're referring to? I'm looking at hermione's noble collection wand and don't see a name plate either.

edit: here is hermione's. https://www.amazon.com/Hermione-Grangers-Wand-Ollivanders-Box/dp/B000BVYQ9Y/ref=sr_1_4?s=toys-and-games&ie=UTF8&qid=1542843094&sr=1-4&keywords=hermiones+wand

edit edit: nvm the box outside of the box, the white box, has dumbledor's name, but no name plate or clip...

https://www.amazon.com/Bandai-Tamashii-BAN19295-Proplica-Keyblade/dp/B07845MRPN/ref=sr_1_1?ie=UTF8&qid=1529560483&sr=8-1&keywords=proplica+keyblade

However, I guess the company has stopped producing this one, and there is only one third-party seller offering it for $2,000... So, I don't suggest this anymore.

Buy him a replica wrestling belt.

Or this

https://www.amazon.com/WWE-Winged-Championship-Amazon-Exclusive/dp/B01J7YO2GC/ref=sr_1_3?keywords=WWE+belt&qid=1559237099&s=gateway&sr=8-3

Is this the set you're referring to? https://www.amazon.com/Tamiya-300074046-Basic-File-Set/dp/B000BMUONA/

Product link if you want a pair.

4 inch die cast wand-Amazon
This it it, it’s on amazon.

Have I got the product for you!
Stylish and utilitarian.

Hasbro makes it. Part of their adult role-play line for the MCU. They have Iron Man's helmet, Cap's shield, Star-lord's helmet and Mjolnir so far. All retail for $99 so don't pay a lot more. You can get them online or at Toys R Us.

https://www.amazon.com/Marvel-Legends-Captain-America-Shield/dp/B01B4NLML2

They just put out a Kylo Ren one for 199.

Edit: http://www.amazon.com/Star-Wars-Series-Deluxe-Lightsaber/dp/B00SOFZLLG

Yea i saw this under the recommendation with the tamiya nippers. Thought it might be a good buy, still undecided and processing all the input.

http://www.amazon.com/Tamiya-300074046-Basic-File-Set/dp/B000BMUONA/ref=pd_bxgy_21_img_3?ie=UTF8&refRID=0HVB95284PC6SJSVYT0Y

Hermione Granger's wand replica.
http://www.amazon.com/Harry-Potter-Hermoine-Grangers-Ollivanders/dp/B000BVYQ9Y/ref=wl_it_dp_o_pC_nS_nC?ie=UTF8&coliid=I222PQ1FVJ24RS&colid=1W1CRX50W3Q9U
I've always wanted to buy it because it's awesome and so very detailed but then I don't really need it but then it would complete my Halloween costume but I don't have the money to buy it...
Yeah.

Currently in stock AND on sale:

http://www.amazon.com/Star-Wars-Black-Deluxe-Lightsaber/dp/B00SOFZLLG/ref=sr_1_1?ie=UTF8&qid=1451931861&sr=8-1&keywords=kylo+ren+black+series+lightsaber

Here's the Amazon link, but you'd probably be able to find it cheaper somewhere else.

all you need is a championship belt.

Here is one for less than 20 bucks from amazon. Overnight it OP!

HAPPY BIRTHDAY! 30 is a good age. You're in your prime. Have a good year, and I hope you get more attention for 31.

My wish list is full of baby gear for my son, who will be born this winter. But I have a few items on there, like this Harry Potter wand and Mardaurer's Map, that are there JUST for me, and JUST to cheer me up and make me happy!

http://www.amazon.com/Harry-Potter-NN7888-Marauders-Map/dp/B0026PW67W/ref=sr_1_1?ie=UTF8&qid=1375733082&sr=8-1&keywords=harry+potter+map

http://www.amazon.com/HARRY-POTTER-inch-collectable-WAND/dp/B000BVYQ9O/ref=wl_it_dp_o_pC_nS_nC?ie=UTF8&colid=2MF6375C6MHWM&coliid=I3AIX3KTJZ3ATQ

Was it this one, this one, or this one (nsfw)?

I use hard Wave sticks too and love them. They sand very flat (something I liked files for) but are quite gentle on the plastic in terms of deap scratches. BUT for some reason the 800 grit is disconnected like in your link. Anyone know where else you can get it?

In terms of files I have the Tamiya basic , Tamiya fine basic , and a (hopefully) nicer plastic hobby file on order just to try. Files are nice for larger jobs like serious molding flaws (not common in Bandai kits) and the fine ones are OK for nubs but still quite rough compared to any sanding stick. Although, as you know I'm sure, files last forever and require much less effort and time to chew through plastic. I'm hoping the plastic file is the Holy grail and is a good balance. I bought a set of needle files and diamond files from harbor freight and they blow. The trash just don't grip or cut don't waste your $3.

And as a reference I own Revell, squadron , nail buff sticks, and have made my own sticks from automotive sand paper. The nail files are way too rough imo, making my own is a pain, and while the squadron sticks are nice I mainly only used the tri-grit while I used all the Revell except the roughest and are probably the best value imo. I still use the other more flexible kinds but dramatically prefer wave. Wish the 800 grit still were available.

Long post sorry. Hope it helps

Edits: spelling, phrasing, and lots of links

for $100, you could get her that [Captain America Shield] (https://www.amazon.com/Marvel-Legends-Captain-America-Shield/dp/B01B4NLML2) or the Iron Man helmet

https://www.amazon.com/Kangaroo-Costumes-Devils-Pitchfork-Handle/dp/B01EXBRYEG/ref=sr_1_9

[For your office]
(http://www.amazon.com/HomArt-1852-1-Bear-Bottle-Opener/dp/B0035GMRDY/ref=sr_1_9?ie=UTF8&qid=1367968248&sr=8-9&keywords=bottle+opener+wall+mounted)

Off my wishlist

Thanks, buddy, that means a lot. I guess the closest thing for this thing to get mass produced IS the Proplica Version of it: https://www.amazon.com/Bandai-Tamashii-BAN19295-Proplica-Keyblade/dp/B07845MRPN

https://www.amazon.com/Bandai-Tamashii-BAN19295-Proplica-Keyblade/dp/B07845MRPN/ref=sr_1_1?ie=UTF8&qid=1527039570&sr=8-1&keywords=keyblade&dpID=31RrkIMf7NL&preST=_SY300_QL70_&dpSrc=srch

https://www.amazon.com/gp/aw/d/B017KIQOSQ/ref=psdcmw_166038011_t1_B0071NORX0

They are meant to mainly be shown off, but have much better lighting then duelling ones and can withstand some lighthearted dueling

DUDE!!!!

https://www.amazon.com/gp/product/B01B4NLML2/ref=od_aui_detailpages00?ie=UTF8&psc=1


It's listed here for $99 directly from Amazon!!

Get him pokeballs! That way him and his friend can throw them around and play pretend. I just got a little set of them for my own nephew. These ones are made of foam so they're okay to throw without hurting anyone.

Or a belt with pokeballs like this one would be cool too.

I was wondering if i can trust this seller?

​

I am trying to buy an infinity gauntlet replica, this one has an insane discount but I am none the less doubtful, can I get some help? The name is frog fun. here is a link: https://www.amazon.ca/gp/product/B071WT4KLM/ref=ox_sc_act_title_1?smid=A2LU61D8LAFXO3&psc=1

Thanks!

On Amazon.com! I'm obsessed with googly eyes.

The loser always says "I hate this toy!"

Occasionally gets below that on Amazon.

https://camelcamelcamel.com/Star-Wars-Black-Skywalker-Lightsaber/product/B017KIQOSQ

Maybe try waiting for the May 4th sales?

https://www.amazon.com/Noble-Collection-Hermione-Grangers-Ollivanders/dp/B000BVYQ9Y/ref=sr_1_6?ie=UTF8&qid=1541519223&sr=8-6&keywords=interactive+wands+universal+studios&dpID=415eZNH681L&preST=_SY300_QL70_&dpSrc=srch